Hardware Development (HDK) - Discussions - IngenuityWorking

Hardware Development (HDK)

|

	Topic	Date	Replies	Views
mariela.garcia	Expansion port 3 omnii xt10	Latest post by Steven Cox 27 Aug 2012 11:00 AM	21	3544
Alutel	Use PCB from RS232 Snap On to connect through USB	Latest post by Steven Cox 6 May 2013 3:06 PM	6	206
Alutel	Choose when to connect the Snap On. EP10	Latest post by Alutel 6 Mar 2013 2:31 PM	8	538
psion_mbutler	Looking for a endcap or pod with a waterproof USB connector (Omnii...	Latest post by Steven Cox 4 Mar 2013 4:47 PM	1	125
Bob Seitz	USB Internal Board - XT15	Latest post by Lee Hunt 4 Mar 2013 1:49 PM	4	194
Ben	UART on Internal Scanner Connector	Latest post by Steven Cox 27 Feb 2013 4:51 PM	6	307
Steven Cox	WAP G2/G3: Do you use the DC_IN pins (pins 97/99) on the 100 pin connector...	Latest post by Steven Cox 13 Feb 2013 2:00 PM	1	403
DAVID ACUNA	Omnii HDK files	Latest post by Steven Cox 12 Feb 2013 2:28 PM	5	414
Alutel	Development kit EP10 Snap On Module	Latest post by Steven Cox 1 Feb 2013 6:17 AM	6	577
Leonardo Junco	Multi-I/O Expansion Module for WAP	Latest post by Ben 4 Oct 2011 10:39 AM	6	2020
MicroTech	Interfacing RF 433Mhz module with Psion IKON Model # 7505	Latest post by MicroTech 31 Aug 2012 7:25 AM	0	359
oisol	Ikon HDk	Latest post by Scott Green 7 Aug 2012 7:33 AM	1	367
Dan Zirkle	Can we use the camera in the EP10 or Omnii to decode 2D bar codes...	Latest post by Alexander Miller 1 Sep 2011 10:41 AM	4	2029
Steve M. Williams	Workabout Pro 3 and Camera?	Latest post by Scott Green 17 May 2012 12:44 PM	3	824
Fernando	Flat connector of the GPS MODULE	Latest post by Fernando 3 Jan 2012 9:42 AM	4	2004