Browse by Tags

Hello Wander, Please refer to the following post as it contains answers to your question above. http://community.psionteklogix.com/discussions/f/38/t/2217.aspx Aneline

Hello Wander, Gustavo, and Helvecio, The product bulletin in question was revised to point out that the GPRS radio is indeed not included when ordering the reader under part number 1100625.. The correct version is posted at the following link: http://community.psionteklogix.com/knowledge/w/knowledgebase...

When is an RFID reader more than just a reader? When it serves as an external power source for sensors. When we say RFID - we immediately think of warehouse and logistics applications. Yet there is a trend to merge operations with quality measures. The AVX HF sensor reader built for the Workabout...

I figured that's what you might have been looking for. Does your device configuration require an 802.11 radio? If not, you could use the CF slot for the WWAN component. We have found a supplier for CF based WWAN radios in China. Be advised that you will have to check with the local authorities on...

We are pleased to announce two new UHF passive RFID options for the WorkAbout Pro.You now have the ability to use the CAEN A528 RFID reader in conjunction with a circular antenna which does not require the use of the GSM/GPRS radio. Details pertaining to the enhancements of our UHF passive offering...

in a RFID prothotype project we need write tag Mifare with the WAP with HID reader (HF Multi ISO) We need to right an URL inside the memory tag, simulating what is writing a NOKIA 6212 NFC mobile phone to do it, we need know the default password present an Mifare Classic 1Kb there is someone...

This video is really cool, there are hundreds of application where such RFID fast scanning benefits make sense ! Did you try calculating ROI on such application ? Pierre

Good point, Pierre! Well, since you brought it up, let me share the following RFID in apparel ROI calculator with everyone. This was created by RFID Journal and is/should be very useful tool when faced with this type of RFID implemementations. (Please visit the site to view this file) Should...

Very interesting Excel spreadsheet indeed ! Did you get feedback from customers using this ROI calculator ?

Personally, I didn't. However, I'm sure that it's been used in many accounts. Now the challenge will be to adapt it for other RFID applications... I'll keep you posted on how that goes.

Ever wondered how RFID could benefit your business (especially time wise) especially when compared to traditional barcoding? Here's a quick and simple demonstration of the two technologies compare, time wise.... (Please visit the site to view this file)

Hi there, I want to know if the RFID specific SDK is the same between NEO and WAPG3. 'cause i want to reuse the more code i can . Fench : J'aimerais savoir si le SDK specifique RFID que j'ai déja utilisé pour mon WAP3 est le même que pour le NEO. J'ai developpé...

Hi there, I just registered because I've ran across a small problem (i hope it's small): I read on the manual that I can map a trigger of my WAP3 device to the RFID reader (Page 158 of the manual) but looks like I'm unable to do so (I'm using an UHF CA3-AC1 A528 RFID Module on the...

Hi all, We are russian company and have big potential RFID project. WAP3 is the device that suits the project perfectly. Unfortunatelly, the wanted RFID modules (for example, CAEN UHF CA1-A1-G2 868 MHz) are not certified to use in Russia. 1) Is there any possibility to certify the uncertified modules...

Hello roddy, The COM port (and the physical interface) used by the XMOD version is different from the GPRS version. The first thing you need to make sure is that you install the appropriate RFID driver for the new reader. You can download the driver manager from the following link: http://community...

Our Reader datasheet is now available on our homepage. http://www.mcsaustria.at/wp-content/uploads/2011/06/Datasheet-MCSA_RFID-4SAM-tocpcap_eng.pdf

we´ve launched a HF Mulit ISO Reader (NXP) for the Workabout Pro with a splitter board on it. The HF Reader can be connected to the scanner board together with a 2D Imager, this means that a UMTS modem and also WLAN can be used additional. the pcb fits into the multi purpose endcap, SAMs are supported...

Hi there, I'm developing an application with WAP + a HDI Module (with the LF-AH1-G2 Driver installed where I have to write some TI R/W transponders. The problem is that i can't find wich commands are required in order to write those transponders. On the Demo application there's no example...

Friends, I couldn't enough inform about mifare reading capability of devices. I wonder, can HF module for Ikon or Wap3 read Mifare Plus (S). I know Mifare Plus is a replacement to Mifare Clasic. But ı can't be sure of it can read Plus (s) Regards