THe marvell card worked, i upgraded now to the latest image file. The card worked after that, i then installed the Juniper OAC for WPA2, but it screwed it somewhat up. So i reset the device with SCAN,BLUE,ENTER and the pressed 1. After this reboot the OAC is gone and even the WLAN.NIC is disabled and i cannot enable it anymore. And i four the Summit ultiity in the start menu, i do not need that. I just want to use win-default or OAC.
There is even no WLAN symbol in the status bar, so how to get my WLAN NIC back to work?
Should i reflash it?
have you tried a "clean" start? click here for Resetting Psion computers
Americas Help Desk
This posting is provided "AS IS". No Warranty. No Guarantee. Maybe updated or changed without notice at any time. You can use the information provided at your own risk.
I tried that after posting it here and the card is back, but the OAC is gone. So i could use WPA again, but no WPA2. I am now reinstalling OAC.
great, so you are on the right track, with OAC, you should have WPA2 support
click here for Odyssey Access Client (OAC) data sheet
Try this procedure to set up the OAC.
From the 7535 Flash disk, install Odyssey. Accept default install location by hitting Enter.
In My Device\Windows\Startup, delete the file OAC.
Navigate to My Device\Flash Disk\OAC, execute OdclientCE. Configure your network in OAC. If static IP is required, navibate to Windows Zero config and set IP.
Warm boot and create a Total Recall profile.
if problem persist, reply back with the 7535G2 system version as well as the OAC version