Hello,Is there list of products to used MiniGBIC Modules in the 9160?I have only tested the module from D-Link 10/100 (DEM 211), which works without problems
or someone can call other modules that work
regards
Stephan
Hello Stephan, i never found that list :-(
Here what i know about it:
Our 9160g2 are limited to 100 Mb SFP port and only supports multi-mode GBIC !There's no settings to change but at least a firmware release G177q is needed.You can connect the ethernet 100 Mb OR the fiber optic. Never both at same time. Only in case of "PoE" the ethernet port can be used used only to drain power.I heard in the past that we used to sell/reccomend:Avango HFBR-57EOLZ Delta LCP-155A4HSR
Hope that could help!
All of the GBICs listed here as working in the 9160G2 are multimode. Is there a single mode GBIC that works?
AP reboot required to detect SFP module.
9160 G2 firmware E140p + Cisco MGBSX1 with Cisco SGE2000 G5 switch = doesn't work,.
Finistar GLC-SX-MM 1.25G 850nm 550m module (1Gbit compatible) x 2 + HP V1910-24G = doesn't work
I didn't changed any AP config. Just connected them instead of ether cable.
AP serial console shows SFP are detected and working in 100Mbit mode. I see uplink on the AP when HP switch is connected. However, it does not show up link on swich port which means port is disabled.
We have a customer using the LC05s purchased from 4 Star Technologies, Inc.
Avago
AFCT 5771PZ
1300nm Laser Prod 21CFR(J) Class 1
Hi All,
Is there an ongoing list for this?
I need a GBIC for a Narrowband 9160.
So it will not be PoE but standard power.
Any help appreciated
Ed
BUMP !
Does anyone have an updated list of GBIC's that work?
Regards,Ronan
Hi Ronan, the list is basically still the same.
We have tested and sell the Avago and Delta GBICs.
They are all 100Mb (not 1Gb) multi-mode gbics.
Bruce