I need to know what would be the appropriate reader for reading bar codes vehicles (specifically hyundai).
I had the same problem I've tried long range laser and laser. attached image
thanks.
Hi Alex
An HHP imager may read the barcode if it is problematic. Is the barcode on a door jamb of a vehicle or is that a box?
As for options which terminal and scanner model are you testing with?
Regards
David
If you have an urgent issue please contact your Regional Technical Support Help Desk
Americas - Asia Pacific - EMEA
Hi Alex,
the barcode in Hyundai VIN is an interleaved 2 of 5 , we had used Moto LORAX scanner to read this code ...I guess we need to set the digit lenght in the scanner settings to match the digit in Interleaved 2of 5 code else it may not read..you may also use anylenght in the digits .
we had scanned this in Hyundai Factory in Chennai India in Production line as well as dispatch yard ..
Trust this helps.
Good info, yes the default configuration settings on specific scanners could be related to the apparent non decoding of the barcodes.
Using an HHP imager and camera on an XT15 I was able to decode the larger barcode from the screen as I 2of 5 with a data length of 8 (20185618). The smaller barcode did not decode from my screen
You have to be careful sometimes to find out what the manufacturers default settings are. For example, the Motorola SE655 default setting for Interleaved 2 of 5 is for a set length of 14 only. A better default would be "I 2 of 5 Any Length".