This plug-in is a tool to test the best bitrate configuration for your UHF tag.
Each tag works better with a specific bitrate and according to your tags environment.
First of all, start 'Bitrates Tester' plug-in.
Put your reader in from of your UHF EPC C1G2 tag and run the test.
The program will test each bitrate.
If the bitrate is wrong, you will see the message 'Failed' and a red cross
If the bitrate is good, you will see the message OK and a green check.
You will be able to compare all the good bitrates with the value between [ and ]
In the picture example, the best bitrate is DSB_ASK_M2_TX40RX160 [8.5].
This value means the reader has read an average of tags read of 8.5 at this bitrate.