Knowledge Base

Battery MSDS

Lou DiVincenzo — Wed, 15 May 2013 19:23:23 GMT

Current Revision posted to Knowledge Base by Lou DiVincenzo on 5/15/2013 3:23:23 PM

Battery MSDS – Material Safety Data Sheets Declaration Psion products can be found here.

SPP 188 UN forms requires to ship batteries are found in the MSDS files.

More will be added as this page matures.

Battery MSDS (for transport)
Model #	Part #s	Update	MSDS Renewal Date	Link to File
ST3002	1110089	May 3,2013	Jan 2,2016	(Please visit the site to view this file)
RV3005	1100911-xxx	Apr 30,2013	Jan 2,2016	(Please visit the site to view this file)
RV3010	1100912-xxx	Apr 30, 2013	Jan 2, 2016	(Please visit the site to view this file)
7035	1916926	Sep 20, 2011	Jan 13 2013	(Please visit the site to view this file)
CH3000	1081267	Apr, 30 ,2013	Jan 2, 2016	(Please visit the site to view this file)
CV3000	1080143 1080143-001	Apr, 30,2013	Jan 2,2016	(Please visit the site to view this file)
CV3001	1080144 1080144-001	Apr, 30,2013	Jan 2, 2016	(Please visit the site to view this file)
HU3000	1080141 1080141-001 1080141-002	Apr, 30,2013	Jan 2, 2016	(Please visit the site to view this file)
NI3000	1080088 1080088-001	Apr, 30 ,2013	Jan 2,2016	(Please visit the site to view this file)
ST3001	1005984	Apr, 30 ,2013	Jan 2,2016	(Please visit the site to view this file)
ST3000	1100351	Apr, 30 ,2013	Jan 2,2016	(Please visit the site to view this file)
WA3006	1050494-00?	Apr, 30 ,2013	Jan 2,2016	(Please visit the site to view this file)
WA3010	1050192-00?	Apr, 30 ,2013	Jan 2,2013	(Please visit the site to view this file)
WA3019	1050944	May 4 2011		(Please visit the site to view this file)
WA3005-G1	1030393	February 15 2010		(Please visit the site to view this file)
Workabout MX Battery NiMh	1080177	April 06 2011	April 1, 2014	(Please visit the site to view this file)
F12014-YF Battery PB	9000758	April 20 2011		(Please visit the site to view this file) (Please visit the site to view this file)
MC9090ex	17-A1Z0-0001, 17-A1Z0-0002	December 13, 2011		(Please visit the site to view this file)
BTRY-RS50EAB00-01 Battery for RS507	KTBTRYRS50EAB00-01	December 21,2011	April 13,2013	(Please visit the site to view this file)
BARTEC 9090	B7-A2Z0-0001	FEB 9 2012	April 13,2013	(Please visit the site to view this file) (Please visit the site to view this file)
BT-700-2-101B	BT-700-2-101B	Aug 13 2012	Jan 07 2013	(Please visit the site to view this file) (Please visit the site to view this file)
Cart Battery A512/30G6	93448	May 15,2013	Feb 1,2014	(Please visit the site to view this file)

Tags: Batteries

Battery MSDS

Lou DiVincenzo — Wed, 15 May 2013 19:21:05 GMT

Revision 58 posted to Knowledge Base by Lou DiVincenzo on 5/15/2013 3:21:05 PM

Battery MSDS – Material Safety Data Sheets Declaration Psion products can be found here.

SPP 188 UN forms requires to ship batteries are found in the MSDS files.

More will be added as this page matures.

Battery MSDS (for transport)
Model #	Part #s	Update	MSDS Renewal Date	Link to File
ST3002	1110089	May 3,2013	Jan 2,2017	(Please visit the site to view this file)
RV3005	1100911-xxx	Apr 30,2013	Jan 2,2017	(Please visit the site to view this file)
RV3010	1100912-xxx	Apr 30, 2013	Jan 2, 2017	(Please visit the site to view this file)
7035	1916926	Sep 20, 2011	Jan 13 2013	(Please visit the site to view this file)
CH3000	1081267	Apr, 30 ,2013	Jan 2, 2017	(Please visit the site to view this file)
CV3000	1080143 1080143-001	Apr, 30,2013	Jan 2,2017	(Please visit the site to view this file)
CV3001	1080144 1080144-001	Apr, 30,2013	Jan 2, 2017	(Please visit the site to view this file)
HU3000	1080141 1080141-001 1080141-002	Apr, 30,2013	Jan 2, 2017	(Please visit the site to view this file)
NI3000	1080088 1080088-001	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
ST3001	1005984	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
ST3000	1100351	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
WA3006	1050494-00?	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
WA3010	1050192-00?	Apr, 30 ,2013	Jan 2,2013	(Please visit the site to view this file)
WA3019	1050944	May 4 2011		(Please visit the site to view this file)
WA3005-G1	1030393	February 15 2010		(Please visit the site to view this file)
Workabout MX Battery NiMh	1080177	April 06 2011	April 1, 2014	(Please visit the site to view this file)
F12014-YF Battery PB	9000758	April 20 2011		(Please visit the site to view this file) (Please visit the site to view this file)
MC9090ex	17-A1Z0-0001, 17-A1Z0-0002	December 13, 2011		(Please visit the site to view this file)
BTRY-RS50EAB00-01 Battery for RS507	KTBTRYRS50EAB00-01	December 21,2011	April 13,2013	(Please visit the site to view this file)
BARTEC 9090	B7-A2Z0-0001	FEB 9 2012	April 13,2013	(Please visit the site to view this file) (Please visit the site to view this file)
BT-700-2-101B	BT-700-2-101B	Aug 13 2012	Jan 07 2013	(Please visit the site to view this file) (Please visit the site to view this file)
Cart Battery A512/30G6	93448	May 15,2013	Feb 1,2014	(Please visit the site to view this file)

Tags: battery, wa3006, HSDS, Batteries, Declaration, UN, SP188, HU3000, CH3000, CV3000, CV30001, NI3000, ST3000, WA3010

Battery MSDS

Lou DiVincenzo — Wed, 15 May 2013 19:16:37 GMT

Revision 57 posted to Knowledge Base by Lou DiVincenzo on 5/15/2013 3:16:37 PM

Battery MSDS – Material Safety Data Sheets Declaration Psion products can be found here.

SPP 188 UN forms requires to ship batteries are found in the MSDS files.

More will be added as this page matures.

Battery MSDS (for transport)
Model #	Part #s	Update	MSDS Renewal Date	Link to File
ST3002	1110089	May 3,2013	Jan 2,2017	(Please visit the site to view this file)
RV3005	1100911-xxx	Apr 30,2013	Jan 2,2017	(Please visit the site to view this file)
RV3010	1100912-xxx	Apr 30, 2013	Jan 2, 2017	(Please visit the site to view this file)
7035	1916926	Sep 20, 2011	Jan 13 2013	(Please visit the site to view this file)
CH3000	1081267	Apr, 30 ,2013	Jan 2, 2017	(Please visit the site to view this file)
CV3000	1080143 1080143-001	Apr, 30,2013	Jan 2,2017	(Please visit the site to view this file)
CV3001	1080144 1080144-001	Apr, 30,2013	Jan 2, 2017	(Please visit the site to view this file)
HU3000	1080141 1080141-001 1080141-002	Apr, 30,2013	Jan 2, 2017	(Please visit the site to view this file)
NI3000	1080088 1080088-001	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
ST3001	1005984	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
ST3000	1100351	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
WA3006	1050494-00?	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
WA3010	1050192-00?	Apr, 30 ,2013	Jan 2,2013	(Please visit the site to view this file)
WA3019	1050944	May 4 2011		(Please visit the site to view this file)
WA3005-G1	1030393	February 15 2010		(Please visit the site to view this file)
Workabout MX Battery NiMh	1080177	April 06 2011	April 1, 2014	(Please visit the site to view this file)
F12014-YF Battery PB	9000758	April 20 2011		(Please visit the site to view this file) (Please visit the site to view this file)
MC9090ex	17-A1Z0-0001, 17-A1Z0-0002	December 13, 2011		(Please visit the site to view this file)
BTRY-RS50EAB00-01 Battery for RS507	KTBTRYRS50EAB00-01	December 21,2011	April 13,2013	(Please visit the site to view this file)
BARTEC 9090	B7-A2Z0-0001	FEB 9 2012	April 13,2013	(Please visit the site to view this file) (Please visit the site to view this file)
BT-700-2-101B	BT-700-2-101B	Aug 13 2012	Jan 07 2013	(Please visit the site to view this file) (Please visit the site to view this file)
Cart Battery A512/30G6(Please visit the site to view this file)	93448	May 15,2013		(Please visit the site to view this file)

Tags: battery, wa3006, HSDS, Batteries, Declaration, UN, SP188, HU3000, CH3000, CV3000, CV30001, NI3000, ST3000, WA3010

Battery MSDS

Lou DiVincenzo — Wed, 15 May 2013 17:53:05 GMT

Revision 56 posted to Knowledge Base by Lou DiVincenzo on 5/15/2013 1:53:05 PM

Battery MSDS – Material Safety Data Sheets Declaration Psion products can be found here.

SPP 188 UN forms requires to ship batteries are found in the MSDS files.

More will be added as this page matures.

Battery MSDS (for transport)
Model #	Part #s	Update	MSDS Renewal Date	Link to File
ST3002	1110089	May 3,2013	Jan 2,2017	(Please visit the site to view this file)
RV3005	1100911-xxx	Apr 30,2013	Jan 2,2017	(Please visit the site to view this file)
RV3010	1100912-xxx	Apr 30, 2013	Jan 2, 2017	(Please visit the site to view this file)
7035	1916926	Sep 20, 2011	Jan 13 2013	(Please visit the site to view this file)
CH3000	1081267	Apr, 30 ,2013	Jan 2, 2017	(Please visit the site to view this file)
CV3000	1080143 1080143-001	Apr, 30,2013	Jan 2,2017	(Please visit the site to view this file)
CV3001	1080144 1080144-001	Apr, 30,2013	Jan 2, 2017	(Please visit the site to view this file)
HU3000	1080141 1080141-001 1080141-002	Apr, 30,2013	Jan 2, 2017	(Please visit the site to view this file)
NI3000	1080088 1080088-001	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
ST3001	1005984	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
ST3000	1100351	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
WA3006	1050494-00?	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
WA3010	1050192-00?	Apr, 30 ,2013	Jan 2,2013	(Please visit the site to view this file)
WA3019	1050944	May 4 2011		(Please visit the site to view this file)
WA3005-G1	1030393	February 15 2010		(Please visit the site to view this file)
Workabout MX Battery NiMh	1080177	April 06 2011	April 1, 2014	(Please visit the site to view this file)
F12014-YF Battery PB	9000758	April 20 2011		(Please visit the site to view this file) (Please visit the site to view this file)
MC9090ex	17-A1Z0-0001, 17-A1Z0-0002	December 13, 2011		(Please visit the site to view this file)
BTRY-RS50EAB00-01 Battery for RS507	KTBTRYRS50EAB00-01	December 21,2011	April 13,2013	(Please visit the site to view this file)
BARTEC 9090	B7-A2Z0-0001	FEB 9 2012	April 13,2013	(Please visit the site to view this file) (Please visit the site to view this file)
BT-700-2-101B	BT-700-2-101B	Aug 13 2012	Jan 07 2013	(Please visit the site to view this file) (Please visit the site to view this file)
Cart Battery	93448	May 15,2013

Tags: battery, wa3006, HSDS, Batteries, Declaration, UN, SP188, HU3000, CH3000, CV3000, CV30001, NI3000, ST3000, WA3010

Select Psion SDKs and HDKs

Alexander Krutzke — Tue, 07 May 2013 17:35:45 GMT

Current Revision posted to Knowledge Base by Alexander Krutzke on 5/7/2013 1:35:45 PM

Choose SDKs and HDKs

Mobile Devices SDK

Imaging Services SDK

RFID SDKs

Hardware Development Kits (HDKs)

Mobile Devices SDK

Top

What it does

The Mobile Devices SDK provides APIs that give you control of Psion proprietary hardware:

•

Keyboard backlights and display backlights.

•

Battery power.

•

Remapping keyboards.

•

Docking stations and tether ports.

•

Beeper.

•

Triggers.

•

Configuring WLAN connections.

•

Configuring WWAN connections and making phone calls.

•

Configuring built-in GPS.

•

Configuring built-in accelerometer, gyroscope, digital compass, light sensor, and proximity sensor.

•

Controlling the vibration feature.

Get the latest version

The latest version of the Mobile Devices SDK is used with the following:

•

Windows Embedded CE 5.0

•

Windows Embedded CE 6.0

•

Windows Mobile 6 Classic

•

Windows Mobile 6 Professional

•

Windows Embedded Hand-Held 6.5

The following computers are supplied with these operating systems installed:

•

•

•

•

•

•

•

8525 G2, 8530 G2, 753x G2

•

VH10

For more information see the Mobile Devices Developers Guide.

To download this SDK click here.

Top

Imaging Services SDK

The Imaging Services SDK provides APIs that control Psion built-in imagers.

For more information see the Imaging Services Developers Guide.

EP10 and Omnii

Use the latest version of the Imaging Services SDK. Click here to download.

NEO, Ikôn, Workabout Pro3, Workabout Pro G2

Use version 14.8 of the Imaging Services SDK. Click here to download.

RFID SDKs

There are several SDKs that control RFID readers on Psion computers.

For information, and download instructions, on the SDKs, that are used with specific Psion Computer/RFID reader combinations, get the latest edition of the RFID Software Guide here.

For detailed information on the RFID readers that work with eack Psion computer, get the RFID Product Guide here.

Top

Hardware Development Kits (HDKs)

These HDKs provide the software tools and hardware information, including CAD models and schematics, that you need to design and integrate your own peripherals for Psion hand-held computers.

Select Psion SDKs and HDKs

Alexander Krutzke — Tue, 07 May 2013 17:33:22 GMT

Revision 5 posted to Knowledge Base by Alexander Krutzke on 5/7/2013 1:33:22 PM

Choose SDKs and HDKs

Mobile Devices SDK

Imaging Services SDK

RFID SDKs

Hardware Development Kits (HDKs)

Mobile Devices SDK

Top

What it does

The Mobile Devices SDK provides APIs that give you control of Psion proprietary hardware:

•

Keyboard backlights and display backlights.

•

Battery power.

•

Remapping keyboards.

•

Docking stations and tether ports.

•

Beeper.

•

Triggers.

•

Configuring WLAN connections.

•

Configuring WWAN connections and making phone calls.

•

Configuring built-in GPS.

•

Configuring built-in accelerometer, gyroscope, digital compass, light sensor, and proximity sensor.

•

Controlling the vibration feature.

Get the latest version

The latest version of the Mobile Devices SDK is used with the following:

•

Windows Embedded CE 5.0

•

Windows Embedded CE 6.0

•

Windows Mobile 6 Classic

•

Windows Mobile 6 Professional

•

Windows Embedded Hand-Held 6.5

The following computers are supplied with these operating systems installed:

•

•

•

•

•

•

•

8525 G2, 8530 G2, 753x G2

•

VH10

For more information see the Mobile Devices Developers Guide.

To download this SDK click here.

Top

Imaging Services SDK

The Imaging Services SDK provides APIs that control Psion built-in imagers.

For more information see the Imaging Services Developers Guide.

EP10 and Omnii

Use the latest version of the Imaging Services SDK. Click here to download.

NEO, Ikôn, Workabout Pro3, Workabout Pro G2

Use version 14.8 of the Imaging Services SDK. Click here to download.

RFID SDKs

There are several SDKs that control RFID readers on Psion computers.

For information, and download instructions, on the SDKs, that are used with specific Psion Computer/RFID reader combinations, get the latest edition of the RFID Software Guide here.

For detailed information on the RFID readers that work with eack Psion computer, get the RFID Product Guide here.

Top

Hardware Development Kits (HDKs)

These HDKs provide the software tools and hardware information, including CAD models and schematics, that you need to design and integrate your own peripherals for Psion hand-held computers.

Omnii HDK

For more information see the Omnii HDK User Manual.

To download this HDK click here.

Top

NEO HDK

For more information see the NEO HDK User Manual.

To download this HDK click here.

Top

EP10 HDK

For more information see the EP10 Hand-Held Computer HDK User Manual.

To download this HDK click here.

Top

Workabout Pro HDK

For more information see the Workabout Pro HDK User Manual.

To download this HDK click here.

Top

Select Psion SDKs and HDKs

Alexander Krutzke — Tue, 07 May 2013 17:30:24 GMT

Revision 4 posted to Knowledge Base by Alexander Krutzke on 5/7/2013 1:30:24 PM

Choose SDKs and HDKs

Mobile Devices SDK

Imaging Services SDK

RFID SDKs

Hardware Development Kits (HDKs)

Mobile Devices SDK

Top

What it does

The Mobile Devices SDK provides APIs that give you control of Psion proprietary hardware:

•

Keyboard backlights and display backlights.

•

Battery power.

•

Remapping keyboards.

•

Docking stations and tether ports.

•

Beeper.

•

Triggers.

•

Configuring WLAN connections.

•

Configuring WWAN connections and making phone calls.

•

Configuring built-in GPS.

•

Configuring built-in accelerometer, gyroscope, digital compass, light sensor, and proximity sensor.

•

Controlling the vibration feature.

Get the latest version

The latest version of the Mobile Devices SDK is used with the following:

•

Windows Embedded CE 5.0

•

Windows Embedded CE 6.0

•

Windows Mobile 6 Classic

•

Windows Mobile 6 Professional

•

Windows Embedded Hand-Held 6.5

The following computers are supplied with these operating systems installed:

•

•

•

•

•

•

•

8525 G2, 8530 G2, 753x G2

•

VH10

For more information see the Mobile Devices Developers Guide.

To download this SDK click here.

Top

Imaging Services SDK

The Imaging Services SDK provides APIs that control Psion built-in imagers.

For more information see the Imaging Services Developers Guide.

EP10 and Omnii

Use the latest version of the Imaging Services SDK. Click here to download.

NEO, Ikôn, Workabout Pro3, Workabout Pro G2

Use version 14.8 of the Imaging Services SDK. Click here to download.

RFID SDKs

There are several SDKs that control RFID readers on Psion computers.

For information, and download instructions, on the SDKs, that are used with specific Psion Computer/RFID reader combinations, get the latest edition of the RFID Software Guide here.

For detailed information on the RFID readers that work with eack Psion computer, get the RFID Product Guide here.

Top

Hardware Development Kits (HDKs)

These HDKs provide the software tools and hardware information, including CAD models and schematics, that you need to design and integrate your own peripherals for Psion hand-held computers.

Omnii HDK

For more information see the Omnii HDK User Manual.

To download this HDK click here.

Top

NEO HDK

For more information see the NEO HDK User Manual.

To download this HDK click here.

Top

EP10 HDK

For more information see the EP10 Hand-Held Computer HDK User Manual.

To download this HDK click here.

Top

Workabout Pro HDK

For more information see the Workabout Pro HDK User Manual.

To download this HDK click here.

Top

Select Psion SDKs and HDKs

Alexander Krutzke — Tue, 07 May 2013 17:28:42 GMT

Revision 3 posted to Knowledge Base by Alexander Krutzke on 5/7/2013 1:28:42 PM

Choose SDKs and HDKs

Mobile Devices SDK

Imaging Services SDK

RFID SDKs

Hardware Development Kits (HDKs)

Mobile Devices SDK

Top

What it does

The Mobile Devices SDK provides APIs that give you control of Psion proprietary hardware:

•

Keyboard backlights and display backlights.

•

Battery power.

•

Remapping keyboards.

•

Docking stations and tether ports.

•

Beeper.

•

Triggers.

•

Configuring WLAN connections.

•

Configuring WWAN connections and making phone calls.

•

Configuring built-in GPS.

•

Configuring built-in accelerometer, gyroscope, digital compass, light sensor, and proximity sensor.

•

Controlling the vibration feature.

Get the latest version

The latest version of the Mobile Devices SDK is used with the following:

•

Windows Embedded CE 5.0

•

Windows Embedded CE 6.0

•

Windows Mobile 6 Classic

•

Windows Mobile 6 Professional

•

Windows Embedded Hand-Held 6.5

The following computers are supplied with these operating systems installed:

•

•

•

•

•

•

•

8525 G2, 8530 G2, 753x G2

•

VH10

For more information see the Mobile Devices Developers Guide.

To download this SDK click here.

Top

Imaging Services SDK

The Imaging Services SDK provides APIs that control Psion built-in imagers.

For more information see the Imaging Services Developers Guide.

EP10 and Omnii

Use the latest version of the Imaging Services SDK. Click here to download.

NEO, Ikôn, Workabout Pro3, Workabout Pro G2

Use version 14.8 of the Imaging Services SDK. Click here to download.

RFID SDKs

There are several SDKs that control RFID readers on Psion computers.

For information, and download instructions, on the SDKs, that are used with specific Psion Computer/RFID reader combinations, get the latest edition of the RFID Software Guide here.

For detailed information on the RFID readers that work with eack Psion computer, get the RFID Product Guide here.

Top

Hardware Development Kits (HDKs)

These HDKs provide the software tools and hardware information, including CAD models and schematics, that you need to design and integrate your own peripherals for Psion hand-held computers.

Omnii HDK

For more information see the Omnii HDK User Manual.

To download this HDK click here.

Top

NEO HDK

For more information see the NEO HDK User Manual.

To download this HDK click here.

Top

EP10 HDK

For more information see the EP10 Hand-Held Computer HDK User Manual.

To download this HDK click here.

Top

Workabout Pro HDK

For more information see the Workabout Pro HDK User Manual.

To download this HDK click here.

Top

Replacing System Software on Omnii & VH10

Bruce McBurney — Mon, 06 May 2013 19:36:26 GMT

Current Revision posted to Knowledge Base by Bruce McBurney on 5/6/2013 3:36:26 PM

This document in PDF format: (Please visit the site to view this file)

Overview

This article describes the procedure for field upgrading the firmware on Omnii hand-held or VH10 vehicle mounted computers. There are two methods for upgrading the firmware:

•
Method 1—Using a USB Memory Stick

•
Method 2—Using a microSD Card (Omnii only)

After the upgrade on Windows Embedded Hand-Held 6.5-based systems, you must install the add-on CAB. You may have to obtain a new Intermec imager driver from the Help Desk.

Update date: 6 May 2013.

Affected Versions

•
All production models of Omnii & VH10.

Checking the Firmware Version Of Omnii or VH10

On Windows Embedded CE 6.0-based systems

1.
In the Control Panel select System Properties.

2.
Expand System Software.

3.
Locate the current firmware version of the following on the list:

•
Power Micro

•
FPGA

•
Syscon

•
Boot code

•
OS

On Windows Embedded Hand-Held 6.5-based systems (Omnii only)

1.
On the desktop select Settings.

2.
Select System.

3.
Select System Properties.

4.
Expand System Software.

5.
Locate the current firmware version of the following on the list:

•
Power Micro

•
FPGA

•
Syscon

•
Boot code

•
OS

Method 1—Using a USB Memory Stick

Equipment Required

•
USB memory stick

•
One of the following accessories for Omnii:

-
Omnii snap module, model number ST4001

-
Omnii docking station, model number ST4002 or ST4003

-
Omnii vehicle mount cradle, model number ST1002 with an interface cable attached (model number CA3001)

Procedure

Prepare the Memory Stick

1.
Obtain the file containing the firmware upgrade.

On Omnii, Power Micro, FPGA, Syscon, Boot Code (BooSt), and the OS are all upgraded simultaneously from one file.

The filename is similar to 7545_..._MULTI_nnnn.img.

2.
Ensure that the memory stick is formatted as a FAT32 volume.

3.
Load the file containing the firmware upgrade in the root directory of the memory stick. The file must be renamed 7545os.img.

Warning:
This should be the only file in the root directory of the memory stick, so as to prevent interference from other IMG files.

Prepare the accessory

Omnii

1.
Ensure that the accessory is using an external power source.

2.
Insert the memory stick into the USB type A port on the accessory.

ST1002 using a CA3001 interface cable: Use either of the two USB ports.

3.
Insert Omnii into the powered accessory.

VH10

Upgrade the firmware

1.
Open the BooSt menu as follows:

•
Omnii
On Windows Embedded CE 6.0-based systems: Press and hold down the [FN] key, the [ENTER/Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

VH10

On Windows Embedded CE 6.0-based systems: Press and hold down the [FN] key, the [ENTER/Power] key, and the [SPACE] key, simultaneously for a minimum of six seconds.

•
On Windows Embedded Hand-Held 6.5-based systems: Press and hold down the [FN] key, the [Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

2.
The firmware upgrade starts immediately.

3.
Several messages showing the progress of the firmware upgrade are displayed on the Omnii screen.

If the upgrade seems to happen very quickly and several messages similar to this appear:

Load skipped, image in primary storage appears to match this image

the upgrade firmware is identical to the existing firmware.

4.
When the update is complete, Omnii/VH10 reboots to the main operating system, and the desktop is displayed.

Warning:
Do not remove Omnii from the accessory until the update is complete.

Complete the upgrade

1.
Verify that the firmware version on Omnii/VH10 is the one that should be there after this upgrade.

2.
When you have completed the upgrade, remove the memory stick from the accessory or VH10 USB port.

Method 2—Using a microSD Card (Omnii only)

Equipment Required

•
MicroSD card.

Procedure

Prepare the microSD card

1.
Obtain the file containing the firmware upgrade.

On Omnii, Power Micro, FPGA, Syscon, Boot Code (BooSt), and the OS are all upgraded simultaneously from one file.

The filename is similar to 7545_..._MULTI_nnnn.img.

2.
Ensure that the microSD card is formatted as a FAT32 volume.

3.
Load the file containing the firmware upgrade onto the microSD card.

The file must be renamed 7545os.img.

Warning:
This should be the only file on the microSD card, so as to prevent interference from other IMG files.

Insert the microSD card into Omnii

1.
Press the battery release buttons to remove the battery.

2.
Use a Phillips screwdriver to remove the screw securing the SD cover.

3.
Flip the SD cover open.

4.
Slide the microSD door to the left to unlock it.

5.
Flip the microSD door open.

6.
Slide the microSD card onto the guides on the SD card door.

7.
Close the microSD door and slide it to the right to lock it.

8.
Re-install the battery in Omnii.

Upgrade the firmware

1.
On Omnii, open the BooSt menu as follows:

•
On Windows Embedded CE 6.0-based systems: Press and hold down the [FN] key, the [ENTER/Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

•
On Windows Embedded Hand-Held 6.5-based systems: Press and hold down the [FN] key, the [Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

2.
The firmware upgrade starts immediately.

3.
Several messages showing the progress of the firmware upgrade are displayed on the Omnii screen.

If the upgrade seems to happen very quickly and several messages similar to this appear:

Load skipped, image in primary storage appears to match this image

the upgrade firmware is identical to the existing firmware.

4.
When the update is complete, Omnii reboots to the main operating system, and the desktop is displayed.

Complete the upgrade

1.
Verify that the firmware version on Omnii is the one that should be there after this upgrade.

2.
When you have completed the upgrade, do one of the following:

•
Remove the microSD card from Omnii.

•
Rename, or delete, 7545os.img so as to prevent the upgrade from running if Omnii is placed in BooSt.

After the Firmware Upgrade

On Windows Embedded Hand-Held 6.5-based systems

1.
Download the add-on CAB file from Ingenuity Working to your Omnii.

2.
Double-click the add-on CAB filename to install the CAB file.

Omnii does an automatic restart to complete the installation.

On Omniis with Imagers

After an OS update, you need to update the Imager Control Service (ICS). You can find ICS CAB files posted on Ingenuity Working for most imagers. If your Omnii has an Intermec imager, you must contact the Psion Help Desk to obtain the ICS CAB file.

Upgrading Omnii Firmware : Overview

Tags: firmware

Replacing System Software on Omnii & VH10

Bruce McBurney — Mon, 06 May 2013 19:33:29 GMT

Revision 15 posted to Knowledge Base by Bruce McBurney on 5/6/2013 3:33:29 PM

This document in PDF format: (Please visit the site to view this file)

Overview

This article describes the procedure for field upgrading the firmware on Omnii hand-held or VH10 vehicle mounted computers. There are two methods for upgrading the firmware:

•
Method 1—Using a USB Memory Stick

•
Method 2—Using a microSD Card (Omnii only)

After the upgrade on Windows Embedded Hand-Held 6.5-based systems, you must install the add-on CAB. You may have to obtain a new Intermec imager driver from the Help Desk.

Update date: 6 May 2013.

Affected Versions

•
All production models of Omnii & VH10.

Checking the Firmware Version Of Omnii or VH10

On Windows Embedded CE 6.0-based systems

1.
In the Control Panel select System Properties.

2.
Expand System Software.

3.
Locate the current firmware version of the following on the list:

•
Power Micro

•
FPGA

•
Syscon

•
Boot code

•
OS

On Windows Embedded Hand-Held 6.5-based systems (Omnii only)

1.
On the desktop select Settings.

2.
Select System.

3.
Select System Properties.

4.
Expand System Software.

5.
Locate the current firmware version of the following on the list:

•
Power Micro

•
FPGA

•
Syscon

•
Boot code

•
OS

Method 1—Using a USB Memory Stick

Equipment Required

•
USB memory stick

•
One of the following accessories for Omnii:

-
Omnii snap module, model number ST4001

-
Omnii docking station, model number ST4002 or ST4003

-
Omnii vehicle mount cradle, model number ST1002 with an interface cable attached (model number CA3001)

Procedure

Prepare the Memory Stick

1.
Obtain the file containing the firmware upgrade.

On Omnii, Power Micro, FPGA, Syscon, Boot Code (BooSt), and the OS are all upgraded simultaneously from one file.

The filename is similar to 7545_..._MULTI_nnnn.img.

2.
Ensure that the memory stick is formatted as a FAT32 volume.

3.
Load the file containing the firmware upgrade in the root directory of the memory stick. The file must be renamed 7545os.img.

Warning:
This should be the only file in the root directory of the memory stick, so as to prevent interference from other IMG files.

Prepare the accessory

1.
Ensure that the accessory is using an external power source.

2.
Insert the memory stick into the USB type A port on the accessory.

ST1002 using a CA3001 interface cable: Use either of the two USB ports.

3.
Insert Omnii into the powered accessory.

VH10

Upgrade the firmware

1.
Open the BooSt menu as follows:

•
Omnii
On Windows Embedded CE 6.0-based systems: Press and hold down the [FN] key, the [ENTER/Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

VH10

On Windows Embedded CE 6.0-based systems: Press and hold down the [FN] key, the [ENTER/Power] key, and the [SPACE] key, simultaneously for a minimum of six seconds.

•
On Windows Embedded Hand-Held 6.5-based systems: Press and hold down the [FN] key, the [Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

2.
The firmware upgrade starts immediately.

3.
Several messages showing the progress of the firmware upgrade are displayed on the Omnii screen.

If the upgrade seems to happen very quickly and several messages similar to this appear:

Load skipped, image in primary storage appears to match this image

the upgrade firmware is identical to the existing firmware.

4.
When the update is complete, Omnii/VH10 reboots to the main operating system, and the desktop is displayed.

Warning:
Do not remove Omnii from the accessory until the update is complete.

Complete the upgrade

1.
Verify that the firmware version on Omnii/VH10 is the one that should be there after this upgrade.

2.
When you have completed the upgrade, remove the memory stick from the accessory or VH10 USB port.

Method 2—Using a microSD Card (Omnii only)

Equipment Required

•
MicroSD card.

Procedure

Prepare the microSD card

1.
Obtain the file containing the firmware upgrade.

On Omnii, Power Micro, FPGA, Syscon, Boot Code (BooSt), and the OS are all upgraded simultaneously from one file.

The filename is similar to 7545_..._MULTI_nnnn.img.

2.
Ensure that the microSD card is formatted as a FAT32 volume.

3.
Load the file containing the firmware upgrade onto the microSD card.

The file must be renamed 7545os.img.

Warning:
This should be the only file on the microSD card, so as to prevent interference from other IMG files.

Insert the microSD card into Omnii

1.
Press the battery release buttons to remove the battery.

2.
Use a Phillips screwdriver to remove the screw securing the SD cover.

3.
Flip the SD cover open.

4.
Slide the microSD door to the left to unlock it.

5.
Flip the microSD door open.

6.
Slide the microSD card onto the guides on the SD card door.

7.
Close the microSD door and slide it to the right to lock it.

8.
Re-install the battery in Omnii.

Upgrade the firmware

1.
On Omnii, open the BooSt menu as follows:

•
On Windows Embedded CE 6.0-based systems: Press and hold down the [FN] key, the [ENTER/Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

•
On Windows Embedded Hand-Held 6.5-based systems: Press and hold down the [FN] key, the [Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

2.
The firmware upgrade starts immediately.

3.
Several messages showing the progress of the firmware upgrade are displayed on the Omnii screen.

If the upgrade seems to happen very quickly and several messages similar to this appear:

Load skipped, image in primary storage appears to match this image

the upgrade firmware is identical to the existing firmware.

4.
When the update is complete, Omnii reboots to the main operating system, and the desktop is displayed.

Complete the upgrade

1.
Verify that the firmware version on Omnii is the one that should be there after this upgrade.

2.
When you have completed the upgrade, do one of the following:

•
Remove the microSD card from Omnii.

•
Rename, or delete, 7545os.img so as to prevent the upgrade from running if Omnii is placed in BooSt.

After the Firmware Upgrade

On Windows Embedded Hand-Held 6.5-based systems

1.
Download the add-on CAB file from Ingenuity Working to your Omnii.

2.
Double-click the add-on CAB filename to install the CAB file.

Omnii does an automatic restart to complete the installation.

On Omniis with Imagers

After an OS update, you need to update the Imager Control Service (ICS). You can find ICS CAB files posted on Ingenuity Working for most imagers. If your Omnii has an Intermec imager, you must contact the Psion Help Desk to obtain the ICS CAB file.

Upgrading Omnii Firmware : Overview

Tags: firmware, update, software, Omnii

Replacing System Software on Omnii & VH10

Bruce McBurney — Mon, 06 May 2013 19:21:13 GMT

Revision 14 posted to Knowledge Base by Bruce McBurney on 5/6/2013 3:21:13 PM

This document in PDF format: (Please visit the site to view this file)

Overview

This article describes the procedure for field upgrading the firmware on Omnii hand-held computers. There are two methods for upgrading the firmware:

•
Method 1—Using a USB Memory Stick

•
Method 2—Using a microSD Card

After the upgrade on Windows Embedded Hand-Held 6.5-based systems, you must install the add-on CAB. You may have to obtain a new Intermec imager driver from the Help Desk.

Update date: 6 May 2013.

Affected Versions

•
All production models of Omnii & VH10.

Checking the Firmware Version Of Omnii or VH10

On Windows Embedded CE 6.0-based systems

1.
In the Control Panel select System Properties.

2.
Expand System Software.

3.
Locate the current firmware version of the following on the list:

•
Power Micro

•
FPGA

•
Syscon

•
Boot code

•
OS

On Windows Embedded Hand-Held 6.5-based systems

1.
On the desktop select Settings.

2.
Select System.

3.
Select System Properties.

4.
Expand System Software.

5.
Locate the current firmware version of the following on the list:

•
Power Micro

•
FPGA

•
Syscon

•
Boot code

•
OS

Method 1—Using a USB Memory Stick

Equipment Required

•
USB memory stick

•
One of the following accessories for Omnii:

-
Omnii snap module, model number ST4001

-
Omnii docking station, model number ST4002 or ST4003

-
Omnii vehicle mount cradle, model number ST1002 with an interface cable attached (model number CA3001)

Procedure

Prepare the Memory Stick

1.
Obtain the file containing the firmware upgrade.

On Omnii, Power Micro, FPGA, Syscon, Boot Code (BooSt), and the OS are all upgraded simultaneously from one file.

The filename is similar to 7545_..._MULTI_nnnn.img.

2.
Ensure that the memory stick is formatted as a FAT32 volume.

3.
Load the file containing the firmware upgrade in the root directory of the memory stick. The file must be renamed 7545os.img.

Warning:
This should be the only file in the root directory of the memory stick, so as to prevent interference from other IMG files.

Prepare the accessory

1.
Ensure that the accessory is using an external power source.

2.
Insert the memory stick into the USB type A port on the accessory.

ST1002 using a CA3001 interface cable: Use either of the two USB ports.

3.
Insert Omnii into the powered accessory.

Upgrade the firmware

1.
Open the BooSt menu as follows:

•
Omnii
On Windows Embedded CE 6.0-based systems: Press and hold down the [FN] key, the [ENTER/Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

VH10

On Windows Embedded CE 6.0-based systems: Press and hold down the [FN] key, the [ENTER/Power] key, and the [SPACE] key, simultaneously for a minimum of six seconds.

•
On Windows Embedded Hand-Held 6.5-based systems: Press and hold down the [FN] key, the [Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

2.
The firmware upgrade starts immediately.

3.
Several messages showing the progress of the firmware upgrade are displayed on the Omnii screen.

If the upgrade seems to happen very quickly and several messages similar to this appear:

Load skipped, image in primary storage appears to match this image

the upgrade firmware is identical to the existing firmware.

4.
When the update is complete, Omnii reboots to the main operating system, and the desktop is displayed.

Warning:
Do not remove Omnii from the accessory until the update is complete.

Complete the upgrade

1.
Verify that the firmware version on Omnii is the one that should be there after this upgrade.

2.
When you have completed the upgrade, remove the memory stick from the accessory.

Method 2—Using a microSD Card

Equipment Required

•
MicroSD card.

Procedure

Prepare the microSD card

1.
Obtain the file containing the firmware upgrade.

On Omnii, Power Micro, FPGA, Syscon, Boot Code (BooSt), and the OS are all upgraded simultaneously from one file.

The filename is similar to 7545_..._MULTI_nnnn.img.

2.
Ensure that the microSD card is formatted as a FAT32 volume.

3.
Load the file containing the firmware upgrade onto the microSD card.

The file must be renamed 7545os.img.

Warning:
This should be the only file on the microSD card, so as to prevent interference from other IMG files.

Insert the microSD card into Omnii

1.
Press the battery release buttons to remove the battery.

2.
Use a Phillips screwdriver to remove the screw securing the SD cover.

3.
Flip the SD cover open.

4.
Slide the microSD door to the left to unlock it.

5.
Flip the microSD door open.

6.
Slide the microSD card onto the guides on the SD card door.

7.
Close the microSD door and slide it to the right to lock it.

8.
Re-install the battery in Omnii.

Upgrade the firmware

1.
On Omnii, open the BooSt menu as follows:

•
On Windows Embedded CE 6.0-based systems: Press and hold down the [FN] key, the [ENTER/Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

•
On Windows Embedded Hand-Held 6.5-based systems: Press and hold down the [FN] key, the [Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

2.
The firmware upgrade starts immediately.

3.
Several messages showing the progress of the firmware upgrade are displayed on the Omnii screen.

If the upgrade seems to happen very quickly and several messages similar to this appear:

Load skipped, image in primary storage appears to match this image

the upgrade firmware is identical to the existing firmware.

4.
When the update is complete, Omnii reboots to the main operating system, and the desktop is displayed.

Complete the upgrade

1.
Verify that the firmware version on Omnii is the one that should be there after this upgrade.

2.
When you have completed the upgrade, do one of the following:

•
Remove the microSD card from Omnii.

•
Rename, or delete, 7545os.img so as to prevent the upgrade from running if Omnii is placed in BooSt.

After the Firmware Upgrade

On Windows Embedded Hand-Held 6.5-based systems

1.
Download the add-on CAB file from Ingenuity Working to your Omnii.

2.
Double-click the add-on CAB filename to install the CAB file.

Omnii does an automatic restart to complete the installation.

On Omniis with Imagers

After an OS update, you need to update the Imager Control Service (ICS). You can find ICS CAB files posted on Ingenuity Working for most imagers. If your Omnii has an Intermec imager, you must contact the Psion Help Desk to obtain the ICS CAB file.

Upgrading Omnii Firmware : Overview

Tags: firmware, update, software, Omnii

Replacing System Software on Omnii & VH10

Paul Hedley — Mon, 06 May 2013 18:10:56 GMT

Revision 13 posted to Knowledge Base by Paul Hedley on 5/6/2013 2:10:56 PM

This document in PDF format: (Please visit the site to view this file)

Overview

This article describes the procedure for field upgrading the firmware on Omnii hand-held computers. There are two methods for upgrading the firmware:

•
Method 1—Using a USB Memory Stick

•
Method 2—Using a microSD Card

After the upgrade on Windows Embedded Hand-Held 6.5-based systems, you must install the add-on CAB. You may have to obtain a new Intermec imager driver from the Help Desk.

Update date: 29 March 2012.

Affected Omnii Versions

•
All production models of Omnii.

Checking the Firmware Version Of Omnii

On Windows Embedded CE 6.0-based systems

1.
In the Control Panel select System Properties.

2.
Expand System Software.

3.
Locate the current firmware version of the following on the list:

•
Power Micro

•
FPGA

•
Syscon

•
Boot code

•
OS

On Windows Embedded Hand-Held 6.5-based systems

1.
On the desktop select Settings.

2.
Select System.

3.
Select System Properties.

4.
Expand System Software.

5.
Locate the current firmware version of the following on the list:

•
Power Micro

•
FPGA

•
Syscon

•
Boot code

•
OS

Method 1—Using a USB Memory Stick

Equipment Required

•
USB memory stick

•
One of the following accessories:

-
Omnii snap module, model number ST4001

-
Omnii docking station, model number ST4002 or ST4003

-
Omnii vehicle mount cradle, model number ST1002 with an interface cable attached (model number CA3001)

Procedure

Prepare the Memory Stick

1.
Obtain the file containing the firmware upgrade.

On Omnii, Power Micro, FPGA, Syscon, Boot Code (BooSt), and the OS are all upgraded simultaneously from one file.

The filename is similar to 7545_..._MULTI_nnnn.img.

2.
Ensure that the memory stick is formatted as a FAT32 volume.

3.
Load the file containing the firmware upgrade in the root directory of the memory stick. The file must be renamed 7545os.img.

Warning:
This should be the only file in the root directory of the memory stick, so as to prevent interference from other IMG files.

Prepare the accessory

1.
Ensure that the accessory is using an external power source.

2.
Insert the memory stick into the USB type A port on the accessory.

ST1002 using a CA3001 interface cable: Use either of the two USB ports.

3.
Insert Omnii into the powered accessory.

Upgrade the firmware

1.
On Omnii, open the BooSt menu as follows:

•
On Windows Embedded CE 6.0-based systems: Press and hold down the [FN] key, the [ENTER/Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

•
On Windows Embedded Hand-Held 6.5-based systems: Press and hold down the [FN] key, the [Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

2.
The firmware upgrade starts immediately.

3.
Several messages showing the progress of the firmware upgrade are displayed on the Omnii screen.

If the upgrade seems to happen very quickly and several messages similar to this appear:

Load skipped, image in primary storage appears to match this image

the upgrade firmware is identical to the existing firmware.

4.
When the update is complete, Omnii reboots to the main operating system, and the desktop is displayed.

Warning:
Do not remove Omnii from the accessory until the update is complete.

Complete the upgrade

1.
Verify that the firmware version on Omnii is the one that should be there after this upgrade.

2.
When you have completed the upgrade, remove the memory stick from the accessory.

Method 2—Using a microSD Card

Equipment Required

•
MicroSD card.

Procedure

Prepare the microSD card

1.
Obtain the file containing the firmware upgrade.

On Omnii, Power Micro, FPGA, Syscon, Boot Code (BooSt), and the OS are all upgraded simultaneously from one file.

The filename is similar to 7545_..._MULTI_nnnn.img.

2.
Ensure that the microSD card is formatted as a FAT32 volume.

3.
Load the file containing the firmware upgrade onto the microSD card.

The file must be renamed 7545os.img.

Warning:
This should be the only file on the microSD card, so as to prevent interference from other IMG files.

Insert the microSD card into Omnii

1.
Press the battery release buttons to remove the battery.

2.
Use a Phillips screwdriver to remove the screw securing the SD cover.

3.
Flip the SD cover open.

4.
Slide the microSD door to the left to unlock it.

5.
Flip the microSD door open.

6.
Slide the microSD card onto the guides on the SD card door.

7.
Close the microSD door and slide it to the right to lock it.

8.
Re-install the battery in Omnii.

Upgrade the firmware

1.
On Omnii, open the BooSt menu as follows:

•
On Windows Embedded CE 6.0-based systems: Press and hold down the [FN] key, the [ENTER/Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

•
On Windows Embedded Hand-Held 6.5-based systems: Press and hold down the [FN] key, the [Power] key, and the [SCAN] key, simultaneously for a minimum of six seconds.

2.
The firmware upgrade starts immediately.

3.
Several messages showing the progress of the firmware upgrade are displayed on the Omnii screen.

If the upgrade seems to happen very quickly and several messages similar to this appear:

Load skipped, image in primary storage appears to match this image

the upgrade firmware is identical to the existing firmware.

4.
When the update is complete, Omnii reboots to the main operating system, and the desktop is displayed.

Complete the upgrade

1.
Verify that the firmware version on Omnii is the one that should be there after this upgrade.

2.
When you have completed the upgrade, do one of the following:

•
Remove the microSD card from Omnii.

•
Rename, or delete, 7545os.img so as to prevent the upgrade from running if Omnii is placed in BooSt.

After the Firmware Upgrade

On Windows Embedded Hand-Held 6.5-based systems

1.
Download the add-on CAB file from Ingenuity Working to your Omnii.

2.
Double-click the add-on CAB filename to install the CAB file.

Omnii does an automatic restart to complete the installation.

On Omniis with Imagers

After an OS update, you need to update the Imager Control Service (ICS). You can find ICS CAB files posted on Ingenuity Working for most imagers. If your Omnii has an Intermec imager, you must contact the Psion Help Desk to obtain the ICS CAB file.

Upgrading Omnii Firmware : Overview

Tags: firmware, update, software, Omnii

Omnii CE6 Release 4.0.29702

Bruce McBurney — Mon, 06 May 2013 16:00:31 GMT

Current Revision posted to Knowledge Base by Bruce McBurney on 5/6/2013 12:00:31 PM

Operating System

Windows CE 6.0

7545_CE6_PRO_EFIGS_MULTI_1107.6_4.0.29702
7545_CE6_PRO_CHS_MULTI_1107.6_4.0.29702
7545_CE6_PRO_CHT_MULTI_1107.6_4.0.29702
7545_CE6_PRO_JPN_MULTI_1107.6_4.0.29702
7545_CE6_PRO_KOR_MULTI_1107.6_4.0.29702

OS Update Precaution:

This software adds a feature that requires the \Flash Disk to be formatted. The installation process will erase the contents of the \Flash Disk. It is recommended to backup any data on the \Flash Disk that you will require after the OS update, on external storage device. A utility is available here to simplify Flash Disk backup.
This OS must use an ICS version of 17.0 or more recent. It is not compatible with older ICS versions.
This release is not supported on the XT10 and therefore will not load.

Major Features & Fixes

Features

Add support SE4500 imager
Add support for SE965 scanner

Fixes

Wifi roaming improvements
Resolved scan engine trigger failure (SE1524 & SE1224)
Resolved intermittently power on from suspend
Add all possible "Wake On" sources in Power control panel applet
Resolve touch screen failure when using option "B" of the Simplified Chinese SIP
Resolve CAB file install error message (Simplified and Traditional Chinese OS)
Phone dialer Send/End functions can be enabled/disabled from the F3 & F4 function keys in the WWAN Tools – User Interface – Keyboard menu.

Tags: 7545

Battery MSDS

Lou DiVincenzo — Fri, 03 May 2013 20:08:22 GMT

Revision 55 posted to Knowledge Base by Lou DiVincenzo on 5/3/2013 4:08:22 PM

Battery MSDS – Material Safety Data Sheets Declaration Psion products can be found here.

SPP 188 UN forms requires to ship batteries are found in the MSDS files.

More will be added as this page matures.

Battery MSDS (for transport)
Model #	Part #s	Update	MSDS Renewal Date	Link to File
ST3002	1110089	May 3,2013	Jan 2,2017	(Please visit the site to view this file)
RV3005	1100911-xxx	Apr 30,2013	Jan 2,2017	(Please visit the site to view this file)
RV3010	1100912-xxx	Apr 30, 2013	Jan 2, 2017	(Please visit the site to view this file)
7035	1916926	Sep 20, 2011	Jan 13 2013	(Please visit the site to view this file)
CH3000	1081267	Apr, 30 ,2013	Jan 2, 2017	(Please visit the site to view this file)
CV3000	1080143 1080143-001	Apr, 30,2013	Jan 2,2017	(Please visit the site to view this file)
CV3001	1080144 1080144-001	Apr, 30,2013	Jan 2, 2017	(Please visit the site to view this file)
HU3000	1080141 1080141-001 1080141-002	Apr, 30,2013	Jan 2, 2017	(Please visit the site to view this file)
NI3000	1080088 1080088-001	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
ST3001	1005984	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
ST3000	1100351	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
WA3006	1050494-00?	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
WA3010	1050192-00?	Apr, 30 ,2013	Jan 2,2013	(Please visit the site to view this file)
WA3019	1050944	May 4 2011		(Please visit the site to view this file)
WA3005-G1	1030393	February 15 2010		(Please visit the site to view this file)
Workabout MX Battery NiMh	1080177	April 06 2011	April 1, 2014	(Please visit the site to view this file)
F12014-YF Battery PB	9000758	April 20 2011		(Please visit the site to view this file) (Please visit the site to view this file)
MC9090ex	17-A1Z0-0001, 17-A1Z0-0002	December 13, 2011		(Please visit the site to view this file)
BTRY-RS50EAB00-01 Battery for RS507	KTBTRYRS50EAB00-01	December 21,2011	April 13,2013	(Please visit the site to view this file)
BARTEC 9090	B7-A2Z0-0001	FEB 9 2012	April 13,2013	(Please visit the site to view this file) (Please visit the site to view this file)
BT-700-2-101B	BT-700-2-101B	Aug 13 2012	Jan 07 2013	(Please visit the site to view this file) (Please visit the site to view this file)

Tags: battery, wa3006, HSDS, Batteries, Declaration, UN, SP188, HU3000, CH3000, CV3000, CV30001, NI3000, ST3000, WA3010

Battery MSDS

Lou DiVincenzo — Fri, 03 May 2013 20:07:40 GMT

Revision 54 posted to Knowledge Base by Lou DiVincenzo on 5/3/2013 4:07:40 PM

Battery MSDS – Material Safety Data Sheets Declaration Psion products can be found here.

SPP 188 UN forms requires to ship batteries are found in the MSDS files.

More will be added as this page matures.

Battery MSDS (for transport)
Model #	Part #s	Update	MSDS Renewal Date	Link to File
ST3002	1110089	May 3,2013	Jan 2,2017
RV3005	1100911-xxx	Apr 30,2013	Jan 2,2017	(Please visit the site to view this file)
RV3010	1100912-xxx	Apr 30, 2013	Jan 2, 2017	(Please visit the site to view this file)
7035	1916926	Sep 20, 2011	Jan 13 2013	(Please visit the site to view this file)
CH3000	1081267	Apr, 30 ,2013	Jan 2, 2017	(Please visit the site to view this file)
CV3000	1080143 1080143-001	Apr, 30,2013	Jan 2,2017	(Please visit the site to view this file)
CV3001	1080144 1080144-001	Apr, 30,2013	Jan 2, 2017	(Please visit the site to view this file)
HU3000	1080141 1080141-001 1080141-002	Apr, 30,2013	Jan 2, 2017	(Please visit the site to view this file)
NI3000	1080088 1080088-001	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
ST3001	1005984	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
ST3000	1100351	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
WA3006	1050494-00?	Apr, 30 ,2013	Jan 2,2017	(Please visit the site to view this file)
WA3010	1050192-00?	Apr, 30 ,2013	Jan 2,2013	(Please visit the site to view this file)
WA3019	1050944	May 4 2011		(Please visit the site to view this file)
WA3005-G1	1030393	February 15 2010		(Please visit the site to view this file)
Workabout MX Battery NiMh	1080177	April 06 2011	April 1, 2014	(Please visit the site to view this file)
F12014-YF Battery PB	9000758	April 20 2011		(Please visit the site to view this file) (Please visit the site to view this file)
MC9090ex	17-A1Z0-0001, 17-A1Z0-0002	December 13, 2011		(Please visit the site to view this file)
BTRY-RS50EAB00-01 Battery for RS507	KTBTRYRS50EAB00-01	December 21,2011	April 13,2013	(Please visit the site to view this file)
BARTEC 9090	B7-A2Z0-0001	FEB 9 2012	April 13,2013	(Please visit the site to view this file) (Please visit the site to view this file)
BT-700-2-101B	BT-700-2-101B	Aug 13 2012	Jan 07 2013	(Please visit the site to view this file) (Please visit the site to view this file)

Tags: battery, wa3006, HSDS, Batteries, Declaration, UN, SP188, HU3000, CH3000, CV3000, CV30001, NI3000, ST3000, WA3010

Declaration of Conformity

Sadashiv Dharwarkar — Fri, 03 May 2013 18:34:20 GMT

Current Revision posted to Knowledge Base by Sadashiv Dharwarkar on 5/3/2013 2:34:20 PM

Declaration of conformity documents for Psion products can be found here.

More will be added as this page matures.

Terminal	DoC
7505 - Ikön	8154.7505_IKon_DoC.pdf
7505 - Ikön	6661.7505_Ikon_Morph_ID_DoC.pdf
7527 – Workabout Pro, Workabout Pro_3, Workabout Pro_G	(Please visit the site to view this file)
7530-G2	6521.7530_G2_DoC.pdf
7535-G2	(Please visit the site to view this file)
PX750 - Neo	8877.PX750_Neo_DoC.pdf
8515 Vehicle Mount	7723.8515_DoC.pdf
8525-G2 Vehicle Mount	6242.8525_G2_DoC.pdf
8530-G2 Vehicle Mount	5621.8530_G2_DoC.pdf
9160-G2 Wireless Gateway	(Please visit the site to view this file)
9500-G2 Communications Server	8306.9500 G2_DoC.pdf
Omnii XT10	(Please visit the site to view this file)
EP10	(Please visit the site to view this file)
8580	(Please visit the site to view this file)
8590	(Please visit the site to view this file)
8585	(Please visit the site to view this file)
8595	(Please visit the site to view this file)
7545	(Please visit the site to view this file) (Please visit the site to view this file)
7545 HF-AM1 RFID	(Please visit the site to view this file)
VH10	(Please visit the site to view this file)

Accessories
Model	Description	Associated Terminal	DoC
CH1005	Vehicle Cradle	7505 - Ikön	(Please visit the site to view this file)
CH4000	Single Docking Station	7505 - Ikön	(Please visit the site to view this file)
CH4004	Quad Docking Station	7505 - Ikön	(Please visit the site to view this file)
WA3001	Single Battery Charger	7527 – Workabout Pro	(Please visit the site to view this file)
WA3004	Quad Battery Charger	7527 – Workabout Pro	(Please visit the site to view this file)
WA4204, WA4304	Quad Docking Station	7527 – Workabout Pro	(Please visit the site to view this file)
WA1210, WA1310	Vehicle Cradle	7527- Workabout Pro	(Please visit the site to view this file)
CV1010/CV1030	Forklift Cradle	7530	3884.CV1010 CV1030 _DoC.pdf
HU1010/HU1030	Forklift Cradle	7535	5280.HU1010_1030_DoC.pdf
HU3002	Combo Charger	7535	5383.HU3002_DoC.pdf
HU3006	6 Gang Battery Charger	7535	3225.HU3006_DoC.pdf
HU4002	Combo Dock	7535	5826.HU4002_DoC.pdf
HU4004	Quad Dock	7535	2313.HU4004_DoC.pdf
PS1350	Pre-reg Power Supply	VMTs and Cradles	8666.PS1350_DoC.pdf
PX3001	Single Dock Station	PX750 - Neo	(Please visit the site to view this file)
PX3004	Quad Dock Station	PX750 - Neo	(Please visit the site to view this file)
ST3006	6 Slot Spare Battery Charger	7545	(Please visit the site to view this file)
ST4002, ST4003, ST1050	Desktop Docking Station	7545	(Please visit the site to view this file)
ST4000, ST4001, ST4005	Charger Adapter	7545	(Please visit the site to view this file)
ST4004	Quad Docking Charger	7545	(Please visit the site to view this file)
ST3113	CLA	7545	(Please visit the site to view this file)
ST1002	Vehicle Cradle	7545	(Please visit the site to view this file)

9510	Server		(Please visit the site to view this file)
RV3004	Charger Spare Battery - 4 Slot	EP10 7515	(Please visit the site to view this file)
RV4004	Charger Quad Dock -Desktop	EP10 7515	(Please visit the site to view this file)
RV1005	Cradle -Vehicle Powered	EP10 7515	(Please visit the site to view this file)

Other Certificates
Country	Terminal	Radio/s	Certificate
China	WORKABOUTPRO, WORKABOUTPRO 3, WORKABOUTPRO G	2.4 GHz	(Please visit the site to view this file)
China	WORKABOUTPRO, WORKABOUTPRO 3, WORKABOUTPRO G	GPRS	(Please visit the site to view this file)
China	WORKABOUTPRO, WORKABOUTPRO 3, WORKABOUTPRO G	GPRS Access	(Please visit the site to view this file)
China	IKON	WIFI	(Please visit the site to view this file)
China	IKON	GPRS	(Please visit the site to view this file)
China	1051585	RFID	(Please visit the site to view this file)
China	NEO	2.4 GHz	(Please visit the site to view this file)
China	7545	BT, b/g Radio	(Please visit the site to view this file)
China	7545	BT, 802.11a/b/g/n, PH8-P	(Please visit the site to view this file)
South Korea	7535 G2	2.4 GHz	(Please visit the site to view this file)
South Korea	7535 G2 Series	2.4 GHz	(Please visit the site to view this file)
South Korea	9160 G2	EMC	(Please visit the site to view this file)
South Korea	RA1001A	NB	(Please visit the site to view this file)
South Korea	PX750	BT, WiFi	(Please visit the site to view this file)
South Korea	PX3001	-	(Please visit the site to view this file)
FCC	WAP, WAP 3, WAP G	BT, WLAN, GSM	(Please visit the site to view this file)
FCC	WAP, WAP 3, WAP G	BT, WALN, UMTS	(Please visit the site to view this file)
FCC	WAP, WAP 3, WAP G	CIRC ANT RFID UHF-CA3-AC5-GPRS	(Please visit the site to view this file)
FCC	WAP, WAP 3, WAP G	HF-T2-G2-XMOD	(Please visit the site to view this file)
FCC	WAP, WAP 3, WAP G	HF-T2-G2-USB MPEC	(Please visit the site to view this file)
FCC	WAP, WAP 3, WAP G	ACG LF-AH1-G2-USB MPEC	(Please visit the site to view this file)
FCC	WAP, WAP 3, WAP G	ACG HF-AM1-G2-USB MPEC	(Please visit the site to view this file)
FCC	WAP, WAP 3, WAP G	RFID CAEN MOD UHF-CA3-A5-G2-FC	(Please visit the site to view this file)
FCC	WAP, WAP 3, WAP G	CIRC ANT RFID-UHF-CA3-AC5-XMOD	(Please visit the site to view this file)
FCC	WAP, WAP 3, WAP G	RFID AGRIDENT LF-AIR200-G2-XMOD	(Please visit the site to view this file)
FCC	7545	BT, WLAN	(Please visit the site to view this file)
FCC	7545	BT, WLAN, PH8-P	(Please visit the site to view this file)
FCC	7545	Zigbee	(Please visit the site to view this file)
FCC	7545	HF-AM1	(Please visit the site to view this file)
Canada	WAP, WAP 3, WAP G	RA2041	(Please visit the site to view this file)
Canada	WAP, WAP 3, WAP G	RA3040 G2	(Please visit the site to view this file)
Canada	WAP, WAP 3, WAP G	RA2043	(Please visit the site to view this file)
Canada	WAP, WAP 3, WAP G	CIRC ANT RFID-UHF-CA3-AC5-GPRS	(Please visit the site to view this file)
Canada	WAP, WAP 3, WAP G	CIRC ANT RFID-UHF-CA3-AC5-XMOD	(Please visit the site to view this file)
Canada	WAP, WAP 3, WAP G	RFID CAEN MOD UHF-CA3-A5-G2-FC	(Please visit the site to view this file)
Canada	7545	BT, WLAN	(Please visit the site to view this file)
Canada	7545	BT, WLAN, PH8-P	(Please visit the site to view this file)
Canada	7545	Zigbee	(Please visit the site to view this file)
Canada	7545	HF-AM1	(Please visit the site to view this file)
FCC	EP10	BT, WLAN, PH8-P	(Please visit the site to view this file)
Canada	EP10	BT, WLAN, PH8-P	(Please visit the site to view this file)
India	8595	SDC-PE15N	(Please visit the site to view this file)
India	8585	SDC-PE15N	(Please visit the site to view this file)
India	7545 XT15	BT WLAN GSM	(Please visit the site to view this file)
India	7545 RT15	BT WLAN GSM	(Please visit the site to view this file)
UL - NI	7545XA	BT WLAN	(Please visit the site to view this file)
South Africa	8516	BT & WiFi a/b/g/n	(Please visit the site to view this file)
FCC	8516	BT & WiFi a/b/g/n NII	(Please visit the site to view this file)
FCC	8516	BT & WiFi a/b/g/n DSS	(Please visit the site to view this file)
FCC	8516	BT & WiFi a/b/g/n DTS	(Please visit the site to view this file)
Canada	8516	BT WiFi a/b/g/n	(Please visit the site to view this file)

Tags: approvals

EP10 WEH 6.5: How to activate the Intermec Imager after performing factory default (clean start)

Luke Wakefield — Fri, 03 May 2013 16:03:08 GMT

Current Revision posted to Knowledge Base by Luke Wakefield on 5/3/2013 12:03:08 PM

Equipment used:

EP10 Windows Mobile 6.5 - Professional OS version 3.0.21417.0

Internal Imager: Intermec EA11

After performing a factory default aka clean start, the device requires the following installers reloaded.

1. 7515_WM65_PRO_WWE_ADDON_VER.cab

2. DecodeLibrary_Install_Intermec_VER.exe

Note: VER = current recommended version. As I write this article, it is version 3.0.21959 for the Add-ON CAB and 15.0.20951 for the Decode Library.

ADDON	Imager And Camera
3.2.24012.0	15.1.23585.0 DecodeLibrary_Install_Intermec_15.1.23585.exe
3.0.21959	15.0.20951 DecodeLibrary_Install_Intermec_15.0.20951.exe

For more info about Resetting Psion Computers, click here

Step 1:

Install Add-On CAB (example 7515_WM65_PRO_WWE_ADDON_3.0.21959.cab)

You can download the appropriate Add-On CAB from Downloads section

Before	After

Step 2:

Install Intermec Decode Library (example DecodeLibrary_Install_Intermec_15.0.20951.exe)

IMPORTANT

Due to licensing restrictions with Intermec, you must contact your local Psion Help Desk and provide them a copy of the EP10 system properties .XML file. A ticket will be filed and then the appropriate Decode Library installer will be sent to you via Psion MOVEit.

Before	After

At this point the EP10 Imager should be functional and ready for use.

Tags: EP10 Imager Intermec EA11 ICS Decode Library reactivate

Omnii CE6 Release 6.0.32066

Bruce McBurney — Thu, 02 May 2013 20:54:15 GMT

Current Revision posted to Knowledge Base by Bruce McBurney on 5/2/2013 4:54:15 PM

Operating System

Windows CE 6.0

7545_CE6_PRO_CHS_MULTI_6.0.32066
7545_CE6_PRO_CHT_MULTI_6.0.32066
7545_CE6_PRO_EFIGS_MULTI_6.0.32066
7545_CE6_PRO_JPN_MULTI_6.0.32066
7545_CE6_PRO_KOR_MULTI_6.0.32066

Special Instructions

This software is approved for all Omnii products (XT10, XT15f, RT/XT15, XT15ni) and VH10 with some known issues (see Limitations section below)
For Omnii devices with Imagers, it is recommended to use the ICS v17.0 release.

Major Features and Fixes

Features

Support for the Omnii Freezer model XT15f.
The 7545 (Omnii) Windows CE 6.0 software releases now add support for the VH10 and Omnii in one release.

Fixes

Omnii

Resolved a condition where the Omnii could not be powered on while in a vehicle dock.
Resolved condition where scan indication splash screen remains on the display until device is rebooted.

VH10

Resolved VH10 Page UP and Page Down key function that was reversed.
Resolved an turn on issue with the VH10 if power is briefly interrupted on devices with no internal UPS.
Resolved PsionVu unlock sequence error on VH10

Limitations

VH10 - If device is cold booted while in a freezer the heaters may not turn on as expected.
Total Recall - "Validate Server" option is always checked when restoring a cloned Wifi profile with WPA2 AES/PEAP

Tags: 7545

Omnii CE6 Release 6.0.32066

Bruce McBurney — Thu, 02 May 2013 20:52:25 GMT

Revision 1 posted to Knowledge Base by Bruce McBurney on 5/2/2013 4:52:25 PM

Operating System

Windows CE 6.0

7545_CE6_PRO_CHS_MULTI_6.0.32066
7545_CE6_PRO_CHT_MULTI_6.0.32066
7545_CE6_PRO_EFIGS_MULTI_6.0.32066
7545_CE6_PRO_JPN_MULTI_6.0.32066
7545_CE6_PRO_KOR_MULTI_6.0.32066

Special Instructions

This software is approved for all Omnii products (XT10, XT15f, RT/XT15, XT15ni) and VH10 with some known issues (see Limitations section below)
For Omnii devices with Imagers, it is recommended to use the ICS v17.0 release.

Major Features and Fixes

Features

Support for the Omnii Freezer model XT15f.
The 7545 (Omnii) Windows CE 6.0 software releases now add support for the VH10 and Omnii in one release.

Fixes

Omnii

Resolved a condition where the Omnii could not be powered on while in a vehicle dock.
Resolved condition where scan indication splash screen remains on the display until device is rebooted.

VH10

Resolved VH10 Page UP and Page Down key function that was reversed.
Resolved an turn on issue with the VH10 if power is briefly interrupted on devices with no internal UPS.
Resolved PsionVu unlock sequence error on VH10

Limitations

VH10 - If device is cold booted while in a freezer the heaters may not turn on as expected.
Total Recall - "Validate Server" option is always checked when restoring a cloned Wifi profile with WPA2 AES/PEAP

Tags: os, software, Omnii, XT10, 7545, XT15, RT15, VH10, 8516

Omnii WEH Release 3.1.32066

Bruce McBurney — Thu, 02 May 2013 20:48:14 GMT

Current Revision posted to Knowledge Base by Bruce McBurney on 5/2/2013 4:48:14 PM

Operating System

Windows Embedded Handheld 6.5

7545_WM65_PRO_ESN_MULTI_3.1.32066
7545_WM65_PRO_FRA_MULTI_3.1.32066
7545_WM65_PRO_GER_MULTI_3.1.32066
7545_WM65_PRO_ITA_MULTI_3.1.32066
7545_WM65_PRO_WWE_MULTI_3.1.32066

Special Instructions

This software is approved for all Omnii products (XT10, XT15f, RT/XT15, XT15ni) with some known issues (see Limitations section below)
For Omnii devices with Imagers, it is recommended to use the ICS v17.0 release.

Major Features & Fixes

Features

Support for the Omnii Freezer model XT15f.

Fixes

Omnii

Resolved a condition where the Omnii could not be powered on while in a vehicle dock.
Resolved condition where scan indication splash screen remains on the display until device is rebooted.
Resolved some Chinese and Japanese translation errors in WEH 6.5

Limitations

Total Recall - "Validate Server" option is always checked when restoring a cloned Wifi profile with WPA2 AES/PEAP

Tags: 7545