Browse by Tags

RFID UHF Passive Options Reading distances table: (Please visit the site to view this file) RFID Products Documentations UHF-CA1-A1-G2 CAEN Module / A828 EU (EN 300 220) Approvals: CE ->(Please visit the site to view this file) Kitting instructions:...

NEO UHF (UHF-CAQ-Ax) This video shows the capabilities of the NEO UHF module (Please visit the site to view this video) NEO UHF at Work HF-AM1-NEO Video of HF-AM1-NEO reading tags (Please visit the site to view this video)

On this section, we will present the smart connectivity tools for RFID Middlewares. For any question please feel free to contact us via Discussion->RFID EPC Global - Low Level Reader Protocol What is LLRP? LLRP stands for Low Level Reader Protocol. It’s an EPCGlobal standard describing...

Description This tutorial will explain you how to create your own plug-in. This can be very useful if: You want to quickly develop a specific application for UHF demonstration purpose on customers side You want to test specific functionalities You will gain time because: We provide...

What is a plugin and how to use it? RFID Plug-in: Anti-collision Test This plug-in will help you reading UHF tags in high density environment and measure the time. RFID Plug-in: Multiple Writes Based on coats discount scenario in textile industry, this plug-in is a demonstration of fast writing...

Description This plug-in is a tool to test the best bitrate configuration for your UHF tag. Each tag works better with a specific bitrate and according to your tags environment. Usage First of all, start 'Bitrates Tester' plug-in. Put your reader in from of your UHF EPC C1G2 tag and...

Description This plug-in will help you to control the UHF channels. This is useful to allow the collocation between UHF readers, reduce interferences or pass radio certification. In the same idea, during exhibitions, you will be able to set your reader on non-used RF channels and in this way to...

Description This plug-in will help you to read and write faster on Fujitsu tags. These tags have a high memory capacity (64 KB user memory). Custom commands are used into CAEN library for high speed large memory writing. Settings First of all, you can determinate the best bitrate for your tag...

Description This plug-in will help you to record on excel file all the UHF tags read during an inventory. Settings For the first use, you have to create 2 tags: START and STOP To do this, please return on the Config panel->R/W tab and select ASCII display Then, you can decrease...

Description This plug-in will show you how you can locate a UHF tag. First step is to select a tag from a database or a recent inventory. Then by starting the search process, you will be able to locate your tag. The finding mode starts a maximum power level to try to catch the tag. When...

Description This plug-in will help you to see the signal strength ( RSSI value) of UHF tags. Normal RSSI values should be in the range -30 dBm, -60 dBm. Use Press ‘Start Inventory’ button to read the tags in the RF field by getting their RSSI. Press ‘Stop...

Description Based on coats discount scenario in textile industry, this plug-in is a demonstration of fast writing on multiple UHF tags. Each UHF tag represents a coat with a COLOR and a DISCOUNT RATE. The goal is to modify quickly these information. The different colors can be Orange...

Description This plug-in will help you reading UHF tags in high density environment and measure the time. Settings By launching the plug-in, the CAEN reader is configured to use Session=S1 and Q=6. By leaving the plug-in, the default CAEN Tools values are reset. For more information...

A plug-in is an external module available in CAEN Tools. Caen reader instance is given in parameter. So the configurations modifications done in CAEN Tools are used in plug-ins.

In this section, you will find information concerning our RFID partners' solutions. For WORKABOUT PRO Frequency Partner RFID Module Description Documentation, SDK & software tools LF Agrident AIR 200 ...

Overview RFID Readers concerned UHF-CA3-A1-G2 UHF-CA3-A5-G2 UHF-CA4-A6-G2 UHF-CA3-AC1-GPRS UHF-CA3-AC5-GPRS UHF-CA3-AC1-XMOD UHF-CA3-AC5-XMOD This article describes the steps you will need to...

Overview RFID Readers concerned UHF-CA1-A1-G2 UHF-CA3-A1-G2 UHF-CA3-A5-G2 UHF-CA4-A6-G2 This article describes the steps you will need to modify the EPC length. Solution According to the Protocol Control values ([http://www.epcglobalinc...

Overview RFID Readers concerned by this article: UHF-CA1-A1-G2 UHF-CA3-Ax-G2 UHF-CA3-ACx-GPRS UHF-CA3-ACx-XMOD This article describes the steps to get the RSSI value of a UHF tag and to convert the value returned in dBm. Solution ...

Summary of current UHF passive RFID offering for the WorkAbout Pro: (Please visit the site to view this file)

Please refer to the Workabout Pro Product Bulletins section at the following link: http://community.psionteklogix.com/knowledge/w/knowledgebase/2010-07-06-new-circular-antenna-with-gprs-option-available-for-workabout-pro-uhf-rfid-module.aspx

New Circular Antenna with GPRS Option Available for WORKABOUT PRO UHF RFID Module Background Approximately two years ago, the CAEN A528 UHF RFID reader module with a linear polarized antenna was released for the WORKABOUT PRO. One of the limitations of this UHF RFID module has been that it could...

Video of RFID solution at CLEOR (Please visit the site to view this video) Photos

RD7950

UHF-CA3-ACx-GPRS UHF-CAx-Ax-G2 HF-T2-G2 HF-AM1-G2 LF-AH1-G2

Below are a the steps required to installing the CAEN UHF RFID reader on the Workabotu Pro G2 or G3. The RFID reader consists of two components, the antenna end cap and the RFID daughter card. Just like in the screen shot below: 1. Snap in the RFID daughter card in the 100pin slot in the...