Browse by Tags

Operating System Windows CE 5 7527_CE50_E-FIGS_MULTI_6.0.1099_J262p 7527_CE50_JAP_MULTI_6.0.1099_J262q 7527_CE50_KOR_MULTI_6.0.1099_J262s 7527_CE50_SCH_MULTI_6.0.1099_J262q 7527_CE50_TCH_MULTI_6.0.1099_J262r Major Features & Fixes WWAN Enable ability to dial out...

Quick Start Guides WorkAbout Pro MC Hand held computer Quick Start Guide (PN: 8100025.A) WorkAbout Pro S Hand-Held Computer Quick start Guide (PN: 8100004.A) WorkAbout Pro (7527C) Quick Start Guide Electronic Version (PN: 8100129-001.A) WORKABOUT PRO G2 C Quick Start Guide (PN: 8000129-001.B...

This test was carried out on a Windows Mobile 6.x classic (with a GSM radio installed - RA3030 G2). In order to have Internet connection on the mobile device via Wireless Wide Area Network (WWAN), a Remove Access Service (RAS) connection on the GSM modem is required. To programmatically launch a PPP...

This test was carried out on a Windows Mobile 6.x classic (with a GSM radio installed - RA3030 G2). In order to have Internet connection on the mobile device via Wireless Wide Area Network (WWAN), a Remove Access Service (RAS) connection on the GSM modem is required. To programmatically launch a PPP...

Includeded in the PsionTeklogix Mobile Devices SDK is WWAN API, hence here's a code snippet that sets up a WWAN data connection and with a feature of polling and calculating the Received Strength Signal Indication in dBm (power ratio in decibels). The code snippet has a callback routine for listening...

Here's some information about sending AT modem commands to the Siemens MC 75 WWAN radio including other types of WWAN radio's. Attached is a sample code in .NET for Windows CE 5.0 WAP with MC 75 WWAN modem that illustrates querying the with AT commands. This example shows querying the WWAN mode...

The PsionTeklogix Mobile Devices SDK includes a Wireless Wide Area Network (WWAN) API that includes features attainable in present day cellular (mobile) phones such as sending and receiving textmessages, establishing and tearing down WWAN data (GPRS) connections, mobile telephony and lots more. This...

Psion provides several serial port interface/cable options for the Workabout Pro ranges Model WA4020-G2: Tether to RS232 converter *** FOR WORKABOUT PRO G2 / G3 ONLY *** This Tether to RS232 Adapter provides RS232 connectivity to the WORKABOUT PRO through the tether port on the bottom of the handheld...

Introduction The use of power supply wall adaptors not supplied by Psion can lead to component failure caused by over-voltage conditions in the WORKABOUT PRO series of hand-held computers. Discussion The WORKABOUT PRO hand-held computer uses the Psion model PS1050-G1 (PHIHONG PSA15R-050P) external...

Workabout Pro G2 & WAP3 WM6.1 Release 5.2.908 Add-On CAB Windows Mobile 6.1 Professional 7527_WM61_PRO_FRA_ADDON_5.2.908.J250p.cab 7527_WM61_PRO_GERMAN_DEU_ADDON_5.2.908.J250p.cab 7527_WM61_PRO_ITAL_ADDON_5.2.908.J250p.cab 7527_WM61_PRO_JPN_ADDON_5.2.908.J250p.cab 7527_WM61_PRO_SCH_ADDON_5...

Product: Workabout Pro3 and G2 (7527) Radio: Cinterion MC75 i (Ra3030-G2 / 1051072-001) Minimum Windows Mobile OS: 5.0.798 Minimum Windows CE OS: 5.1.811 Please note that on the Workabout Pro3 and G2 (7527), the Cinterion MC75 i (Ra3030-G2 / 1051072-001) radio is only compatible with Windows...

UHF-CA3-ACx-GPRS UHF-CAx-Ax-G2 HF-T2-G2 HF-AM1-G2 LF-AH1-G2

Overview: Here is a suite of programs that might become handy if you, for example, need to remotely reset devices. System requirement: - Psion Teklogix Windows CE 4.2 - Psion Teklogix Windows CE 5.0 - Psion Teklogix WIndows Mobile 2003 Second Edition - Psion Teklogix Windows Mobile 5.0 - Psion Teklogix...

Recent product bulletins related to WORKABOUT PRO.

Below is a .NET source code to determine the device manufacturer of a mobile device, such as PsionTeklogix. using System; using System.Collections.Generic; using System.Text; using System.Runtime.InteropServices; using System.Windows.Forms; namespace csRetrieveDeviceName...

Printing over a Wired or Wireless Network from Windows CE CESD-C-0015 Applies to: Windows CE 2.0, SP1 Handheld PC Professional, SP1 Handheld PC 2000 Overview: This article describes the steps involved in printing to a remote printer share over a Local Area Network (LAN)...

Steps in setting up an ActiveSync connection via Bluetooth: 1. Make sure the Bluetooth hardware has been installed on the PC. 2. Find out which COM port the Bluetooth manager on the PC has published for serial communication (i.e. Bluetooth). For this example, COM17 has been published. Edit the...

Requirements : NEO, NEO modem cradle, NEO power adapter, RJ 45 (phone cable). 1. The modem is built into the NEO’s cradle like in the picture below 2. The rear of the NEO cradle, showing the power port, the USB port and the RJ 11 phone jack port. 3. As of this writing the drivers...

Picture of a Compact Flash modem for the Workabout Pro showing the RJ 11 analogue phone port on the endcap 1. Make sure the Modem (hardware) is installed, just like in the screen shot below 2. Create the dial up connection: Start ->Settings->Control Panel->Network and Dialup...

AUTHOR Michael Nweze GATEKEEPER STYLE EDITOR Michael Nweze TECHNICAL EDITOR Michael Nweze PRODUCT MANAGER APPROVED BY KEYWORDS 7527, Ikon, WAP 3, Mobile...

Q) Can the same eVC++ 4.0 executable run against Psion Teklogix CE 4.2 and CE 5.0 devices? A) Yes as long as the eVC++ project is linked against the PtxSdkCpp.lib library for Windows CE 4.2 E.g. the one found in the C:\Program Files\Psion Teklogix\Mobile Devices SDK V2.02\Windows CE 4.20...

Before you begin, you need to install Mobile Device Center 6.1 from Microsoft. You also need to run the Windows update on your windows Vista PC. I have attached another USB setup utility. Rename the file extension to .exe and then install it. Before you install it, please unplug the USB cable from...

1/19/2010 6:16:56 PM AUTHOR Michael Nweze GATEKEEPER STYLE EDITOR Michael Nweze TECHNICAL EDITOR Michael Nweze PRODUCT MANAGER APPROVED BY KEYWORDS...