Browse by Tags

This test was carried out on a Windows Mobile 6.x classic (with a GSM radio installed - RA3030 G2). In order to have Internet connection on the mobile device via Wireless Wide Area Network (WWAN), a Remove Access Service (RAS) connection on the GSM modem is required. To programmatically launch a PPP...

This test was carried out on a Windows Mobile 6.x classic (with a GSM radio installed - RA3030 G2). In order to have Internet connection on the mobile device via Wireless Wide Area Network (WWAN), a Remove Access Service (RAS) connection on the GSM modem is required. To programmatically launch a PPP...

Includeded in the PsionTeklogix Mobile Devices SDK is WWAN API, hence here's a code snippet that sets up a WWAN data connection and with a feature of polling and calculating the Received Strength Signal Indication in dBm (power ratio in decibels). The code snippet has a callback routine for listening...

The PsionTeklogix Mobile Devices SDK includes a Wireless Wide Area Network (WWAN) API that includes features attainable in present day cellular (mobile) phones such as sending and receiving textmessages, establishing and tearing down WWAN data (GPRS) connections, mobile telephony and lots more. This...

Modem Form Factor Technology EOL RoHS PTX Name PTX Part No. 7505 7515 7525 7525 G1 7527 7535, 7535 G2 7545 NetbookPro Netpad Asus AGC-100 CF GSM/GPRS 900/1800/1900MHz Dec 04 98194 X X Chi Mei G1 CF GSM/GPRS 900/1800/1900MHz Jun 05 X...

Wireless Wide-Area Networking Wireless Wide-Area Networking (WWAN) WWAN on Devices Supported by the Mobile Devices SDK WWAN on Devices not Supported by the Mobile Devices SDK Supported WWAN Modems Initializing WWAN Closing WWAN Connecting to the Internet Access Flags RSSI (Received Signal Strength...

Registry-based WWAN API Overview Phone State Registry Settings Phone State Registry Settings in Alphabetical Order System Properties Registry Settings Sample Source Code Overview The registry-based WWAN API described here can be used without having to install a ­Psion SDK. You can use this...

Introduction A VPN (virtual private network) is a way to use a public telecommunication infrastructure, such as the Internet, to provide remote offices or individual users with secure access to their organization's network. A virtual private network can be established with an expensive system of...

Windows Mobile Instructions via Dr. Debug Click on Start then Settings: Select the System tab and open the Dr. Debug applet: Go to the Utilities tab, select RilLog from the drop-down menu, and then press the Start button. A message should appear asking you to reset the device. After...

GSM 02.07 Annex A " Automatic calling repeat call attempt restrictions ". A phone or modem is required to block repeated calls to the same number if that number is likely to be unreachable or busy. The goal is to prevent unnecessary signalling traffic in the network. The feature depends on...

Please refer to the Workabout Pro Product Bulletins section at the following link: http://community.psionteklogix.com/knowledge/w/knowledgebase/2010-07-06-new-circular-antenna-with-gprs-option-available-for-workabout-pro-uhf-rfid-module.aspx

AUTHOR Michael Nweze GATEKEEPER STYLE EDITOR Michael Nweze TECHNICAL EDITOR Michael Nweze PRODUCT MANAGER APPROVED BY KEYWORDS 7527, Ikon, WAP 3, Mobile...

Overview This document outlines the procedure to setup Internet Sharing so that a laptop or PC can use an existing WWAN connection on our Windows Mobile devices to access the Internet. over the PAN - NAP Bluetooth service. Getting Started It is recommended that the Windows Mobile device...

WWAN devices present a slightly different challenge when it comes to discovery. The Beacon configuration probably will not find WWAN devices, however an option exists to create a WWAN shortcut allowing these devices to connect to ARC. To create this shortcut click on Create W WAN Device Update...

Introduction Psion Teklogix mobile device offer, 2.5G and 3G WWAN radios. These radios support different authentication types when establishing a data connection. The following is a list of the authentication types and radio variants supported. PAP The Password Authentication Protocol...

Overview To ensure that everything is logged properly in the WWAN Debug (wwandbg) log, preform the following steps: Wait until the device is ready to use Power cycle the radio Open Start >> Run >> enter wwandbg and press OK >> leave the application running in the...