Browse by Tags
WORKABOUT PRO WA9000-G1 & WA9005-G1 Scanner Module Installation
Preparation Warning: The installation of this scanner module must be performed using the appropriate anti-static devices. If unavailable, discharge static from your body by touching a grounded metallic object before opening any covers on the unit. CAUTION The use of optical...
12 Feb 2013
Omnii XT10 - Damaged AR Coating On Scanner Windows Causes Poor Decoding
Overview Omnii XT10 may suffer from scanner faults due to a weak AR coating on scanner window. The AR coating becomes damaged which impedes the scanner's scanning ability. Removing the AR coating will resolve the issue. Affected Products Omnii XT10 terminals with SE1223, SE1224 SE1524 HHP5080...
30 Jul 2012
My scanned data is missing the configured suffix character
The 3.0.23907 release of Omnii has improved scanning performance by adding a scan and paste mode through the Scanner Service. The functional improvement is most notable when rapidly scanning large barcodes. There is however a limitation to this feature, it doesn’t currently support appended non...
30 May 2012
7035/82xx Base Software Release Notice
Special Instructions This Release should be tested with Agere 8.1 firmware in the Orinoco radio. Known Limitations This software release has been approved with the following known limitations: 1000444A1 IRI103p7035 SCR 7193 Scan indication can remain on the screen...
22 Apr 2010
Scanner Not Working (No Beam) Issue
Overview HHP, EV15, and possibly other scanner will not work on a WORKABOUT PRO G2 device if the Scanner Beeper Flag is enabled. This often occurs in the field if a Lorax (SE1524ER) scanner is replaced with another scanner that does not have an external beeper. The Lorax scanner has an external...
29 Mar 2010
Ikon Scanner and Camera Assembly
The scanner and camera are fastened to the scanner frame. Both scanner and camera are optional; an Ikôn unit may have both of them, one of them, or neither. If neither camera nor scanner are present, the scanner window in the case is covered by a black label. The scanner frame also carries...
26 Mar 2010
Assembling The NEO Scanner-Imager-Supercap Assembly
The scanner or imager is attached to a bracket, which is fastened to the NEO's lower case. There is a different bracket for each type of scanner or imager. This bracket also carries the NEO's supercapacitor: To assemble the scanner/imager and supercap to the bracket: Attach...
24 Mar 2010
Problems Connecting Powerscan D8330 Scanner to 8580 or 8590
Symptoms When the Powerscan PD8330 scanner is connected to an 8590 computer's PS/2 port through a Y-cable, the scanner will not function correctly if the keyboard is removed. Solution No solution has been found that will make this a reliable way to run. Datalogic has available a...
18 Feb 2010
NEO Scanner Assembly
The scanner or imager and the supercapacitor are mounted on a bracket. The scanner and imager are optional; a NEO unit may have one of them, or neither. If neither imager nor scanner are present, the scanner window in the case is covered by a black label. There are different brackets depending...
17 Feb 2010
Scanners The NEO can be fitted at the factory with an internal scanner or imager. An external scanner can be connected through the docking port. Scanner Control Services This top level service (SCS) is responsible for supporting a variety of Physical Scan Drivers (PSD), and presenting...
17 Feb 2010
WORKABOUT PRO Model WA9002-G1 Scanner Module Installation
Preparation Warning: The installation of this scanner module must be performed using the appropriate anti-static devices. If unavailable, discharge static from your body by touching a grounded metallic object before opening any covers on the unit. ...
16 Feb 2010
LS3578 Scanner via Bluetooth
Overview There are several ways to connect to a LS3578 Scanner. The following chart describes each possible method to do so. Click on each icon for detailed instructions on pairing and connecting for that method. Slave Mode Master Mode HID SPP
12 Feb 2010
Scanner Control Services (SCS)
Scanner Control Services (SCS) is a Windows Control Panel application that consolidates a menu system for the user to configure barcode symbologies, data manipulation criteria and port use before the captured data is handed off to the application. SCS can also configure integrated decoding scanners...
11 Feb 2010
WORKABOUT PRO (7525) Scanner ID Codes in BooSt
The following table provides a listing of Scanner ID, <ID>, BooSt codes on the WORKABOUT PRO model 7525 and 7525 G1. Scanner Model BooSt Code None 1 Symbol SE1223HP 2 Symbol SE923HP 3 HHP IT 4080 4 Symagery SC5393 5 ...
11 Feb 2010
Scanner ID Codes in BooSt of G2 Products
The following table provides a listing of scanner ID codes, <ID>, in BooSt on G2 devices: Scanner Type Scanner ID Notes none 0 Symbol SE1200HP 32 1D non-decoded, standard range, high-performance Symbol SE1200LR 33 1D non-decoded...
11 Feb 2010
©Copyright & Legal
Rugged Handheld Computers
Rugged Handheld WORKABOUT PRO
Ergonomic Handheld Ikôn
Productive Handheld NEO
Rugged RFID Technologies
Productive Imaging and Scanning Technologies
Fast Wireless Area Network Technologies
Rugged Warehousing and Distribution
Fast People Transport
Precise Postal and Courier
Rugged Vehicle Mount Computers
Rugged Vehicle Mount Computer 8515
Rugged Vehicle Mount Computer 8525 G2
Rugged Vehicle Mount Computer 8530 G2