I have one 7527-C and need to downgrade the version, since the update it did not work properly with our system. Below your settings:
WINDOWS CE - 5.0
Build type - Release
Boot code - J010q
OS code - L100t
Power Micro code - J010r
Keyboard Micro code - J010r
Scanner Beeper Firmware - N/A
Processor - PXA270
Processor Speed - 530 MHz
Ram - 128 MB
Flash - 128 MB
Scanner - HHP 5X80
Keyboard - 52 key
Display - Sharp
Orientation - Portrait
MLB type - A
MLB Serial - A185C081940
Term Serial - A285M000455
Bluetooth - Installed (enabled)
Bluetooth - LMP: 2.3164
Bluetooth - HCI: 2.3164
PCM/CF Slots - Empty Slot
MMC/SD Slot - Empty Slot
I needed him to be like this:
Where can I download this version?
Thanks in advance!
You can't downgrade to that build. Simply that "OS code = E238i" is too old to run on this device. On the contrary, I recommend upgrading to the latest software that can download from our community "OS code = E051".
What is not working with L100 build?
Americas Help Desk
This posting is provided "AS IS". No Warranty. No Guarantee. Maybe updated or changed without notice at any time. You can use the information provided at your own risk.
in addition to Burt's point, the minimum level of system software for the Sharp display for Windows CE5.0 is released 3.7 (H058j)
Unlike the Sony display it is compatible with releases prior to 3.7 ex. 3.5 (E238i)
So to answer you question,
diflydreamWhere can I download this version?
You can not downgrade the OS of a Workabout Pro G2 (7527) fitted with a Sharp display to OS code E238i
If willing please elaborate on what is not working properly with OS code L100t
Thanks for the help!I have noticed that there are two different types of LCD: Sharp and Sony.The equipment that uses the Sony Sharp does not work. Is there any way to fix this?
There is no way to upgrade to version E238i A299n order to use the Sharp?
diflydreamThere is no way to upgrade to version E238i A299n order to use the Sharp?
What do you mean "upgrade" to E238i?
What is the current OS version/ code of the Workabout Pro G2 built with Sharp display (not Sony)
a Workabout Pro G2 (7527) fitted with a Sharp display must run a minimum OS version 3.7 (OS code H058j)
I Got it.
Because I have a 7527C with the Sony LCD (A299n) and wanted to put the LCDfrom Sharp's other collector that is defective with the card. But when I put it does not work.
Anyway thanks for the help!
You are welcome! glad we can help