Hi,
A while ago Iwas asking for help and you folks helped me reset my device back to factory settings.
Things have been going well but my agrigent scanner is not working as expected.
I've been trying to get airwedge working properly (ie by pressin the left and right buttons on the side to scan the RFID )but it is not working for me.
I tried following the instructions for remapping the keyboard but I can't seem to fine LBUTTON etc as specified here:http://community.psion.com/knowledge/w/knowledgebase/how-to-remap-keys-on-windows-ce-net-handheld-devices-how-to.aspx
Can someone help me?
Thanks, Bill
Oops!
Right your are... On our WORKABOUT PRO G2 and WORKABOUT PRO3 product ranges, no "ScannerOn" entries are to be found within the Label: drop down list. Please use the below illustrated "Trigger" entries instead:
Please post here the system properties file
click here - > Creating a System Properties file
Americas Help Desk
This posting is provided "AS IS". No Warranty. No Guarantee. Maybe updated or changed without notice at any time. You can use the information provided at your own risk.
Hello Bill,
If you need Agrident solution, we have integrated the Agrident module in the Ikon.
It's a more compact solution than in the WAP 3, with the same range of reading and allowing you to use internal antenna and/or an external antenna with a binder connector.
Now with that solution you will be able to propose a full option solution (GSM/HSDPA/GSP/2D barcode reader/Wifi, etc.) with Agrident module.
Feel free to contact me for more information.
Best regards,
Sébastien MICHON
Sales Engineer
COPPERNIC
sebastien.michon@coppernic.fr
Here it is. Please how do I remap LBUTTON etc... for keyboard wedge...
Windows CE - 5.0Build type - EngineeringBoot code - J099pOS code - I219oPower Micro code - I128pKeyboard Micro code - J099nScanner Beeper Firmware - N/AProcessor - PXA270MProcessor Speed - 520 MHzRam - 128 MBFlash - 1024 MBScanner - NoneKeyboard - New keyboard typeDisplay - SharpOrientation - PortraitMLB type - ES15MLB Serial - Not SetTerm Serial - Not SetBluetooth - Installed (disabled)PCM/CF Slots - Empty SlotMMC/SD Slot - Empty SlotExpansion Slot - PsionTeklogix GPRS3Expansion Serial - A28BK009483Expansion Hardware rev - 3WWAN Firmware - REVISION 04.001WWAN Audio Parameter Version - 44.6.0WWAN SIMID - 894900031204010207WWAN IMEI - 355485010215261WWAN IMSI - 001012345678901
Thank you Sebastien. I am just learning about the psion/agrident for a very specific project here and I am quite rusty with microsoft stuff.I will contact you later if needed.Bill
Good morning Bill,
BillHere it is. Please how do I remap LBUTTON etc... for keyboard wedge...
In case it helps, let me share the following HTML help file with you
AirWedge_manual.chm (compressed)
Once donwloaded and decompressed, please take a moment to browse the below section:
Kind regards,Jacques
I must be missing something because when I go to remap the scanner keys there is no entry for "scanner on"
So the olly thing that does work for me is starting the AirDemoVB application and tapping the button on the screen. Then it reads the tag.
What am I missing please?
Bill
OK now I see thanks a lot.
Great! thanks for sending us the device sys prop.
And Jacques, thank you for your help
Cheers