I have just been given the above device to do some work with. Unfortunately the device has been in a cupboard since before I have been in the company (2+ years) and all the batteries had died and installed software deleted.
I am trying to resurrect the device, but do not have a driver for it, can someone advise where I can locate one for Windows XP - so that I can connect to it and install the required software?
Thanks in advance
Jerry.
Hi Alex,
If I may suggest, please read this post, Wapro CE 4.2 vs. Windows 7 - Synchronism Problem, and let me know if it helps.
Regards,
Luke - Technical Support/ Help Desk
Americas Help Desk
This posting is provided "AS IS". No Warranty. No Guarantee. Maybe updated or changed without notice at any time. You can use the information provided at your own risk.
Alex,
FYI, the USB Setup description was recently updated
Old:
The USB Setup program configures your Windows 2000, Windows 2003, Windows XP and Windows Vista workstation to connect via USB to any Psion Teklogix device. Once configured, you can synchronize files via ActiveSync, or update the device’s firmware.
New:
The USB Setup program configures your Windows 2000, Windows 2003, and Windows XP workstation to connect via USB to any Psion Teklogix device. Once configured, you can synchronize files via ActiveSync, or update the device’s firmware.
Note: that for PCs running Windows Vista and Windows 7, USB Setup is now only required to connect to Psion devices if they are in BooSt (boot loader) mode. With Windows Vista, Microsoft replaced ActiveSync with Windows Mobile Device Center. This new Windows feature means that USB Setup is no longer required to establish a connection with Psion mobile computers while they are operational.
Hope this helps
Hello JerryD,
Welcome to our community, Ingenuity Working!
USB Version: 4.0.10873 is now released and can be found here
Downloads » Firmware/Software & Demos » » Software Demos, Tools & Drivers » USB Setup / USBSETUP
Note that for PCs running Windows Vista and Windows 7, USB Setup is now only required to connect to Psion devices if they are in BooSt (boot loader) mode. With Windows Vista, Microsoft replaced ActiveSync with Windows Mobile Device Center.
This new Windows feature means that USB Setup is no longer required to establish a connection with Psion mobile computers while they are operational.
USBSetup_4.0.10873 perform the installation of my pc with windows 7
but does not recognize the WORKABOUT PRO to win 7525 windows ce
so I can not synchronize with the center of windows mobile devices
I await your response