We have had some issues with inaccurate battery readings and backup battery life and I am looking at updating our WAP G2 units that are running CE5.0 to the current keyboard and power microcode as well as updating the OS to the most current build.
My understanding based on the is that all units with the config #1 will have to go to the service depot to be updated whereas config #2 can be updated by us here on-site. Please confirm/correct this.
Depending on what is included in the update image I will have to adjust our deployment rules etc. to that end -what is included in the OS update?
NOTE: We still have some programs running on the OPL interpreter - will the OS and other updates cause any problems with this?
Thanks for any assistance that you can provide.
Tim McCallum
Hi Tim
community.psionteklogix.com/.../workabout-pro-backup-battery-power-microcontroller-firmware-upgrade.aspx
Please read this regarding upgrade off keyboard and power microcode at the WAP G2 terminal
Hi Tim,
The PSIONinfo packaged is part of MCC and ready to use when the MCC deployment server is installed.
MCC agent is not in the OS image.
Current version of MCC is 6.03.
Regards
Lars Hansen
The daylight savings patch is included in current releases such as C039n or the currently posted version 7527_CE50_E-FIGS_MULTI_5.1.811_B090r available here.
community.psionteklogix.com/.../569.aspx
David
If you have an urgent issue please contact your Regional Technical Support Help Desk
Americas - Asia Pacific - EMEA
Thanks for all of your feedback.
Overall it confirms what I thought - most of our units will have to go offsite for updating at this point.
Is there a document that provides a sum of the chronological/versioned history of the changes between OS images?
This would help tremendously.