I am using Windows Mobile Device Centre 6.1.6965. I have tried using USBSetup_4.0.10873 for connecting HHT's with my PC. I am unsing Windows 7.
The issue is i am not able to detect the drive for HHT's when start the terminal for Boost menu.
Thanks and regards,
please read this post, might prove useful to resolve your issue
Americas Help Desk
This posting is provided "AS IS". No Warranty. No Guarantee. Maybe updated or changed without notice at any time. You can use the information provided at your own risk.
Also if you could clarify which model HHT you are attempting to connect and which OS variant it is running
If you have an urgent issue please contact your Regional Technical Support Help Desk
Americas - Asia Pacific - EMEA
click here for Creating System Properties TEXT file
I am trying for 7530 HHT with CE 5.0 OS.
I have tried the below mentioned process, i found it on IW for EP10 & Ikon, which is working fine.
1. Browse to the desktop and right click on Computer System Folder. Select properties from the drop down menu. 2. Click on device manager located in the top left. 3. You will notice that device will show up under other devices and will have a yellow exclamation mark on it. 4. Right click on the device and select properties. 5. Select the Driver tab and click update driver. 6. Select Browse my computer for driver software. 7. Select Let me pick from a list of devices drivers on my computer 8. Double click on Show all Devices (first one in the list) 9. The computer will take some time to display all the drivers. Under Manufacturer select "Compatible USB storage device" and for Model select "USB Mass Storage Device" 10. Click Next. Windows will give a warning click yes. Close all the open windows. 11. The removable drive will now show on your My computer as a removable drive. Note: This removable drive is the physical RAM of the device (in boost mode).
I am able to get the drive, which shows as empty drive.
Now i am not able to connect the unit through Windows Mobile Device Centre, i tried the same steps but no luck. I am able to connect to 7535 through Windows Mobile Device Centre but not this 7530 Unit (Narrowband).
what is the system software version on your 7530 Narrowband unit?
Boot code: __________
OS code: __________
PCon code: __________
Excellent question Luke, As a 2008 or newer build such as PXA270-G2_CE50_MULTI_1.16.538_B118s is needed for Windows 7 to automatically detect the terminals, otherwise the manual kludge method needs to be done for each device.
If the OS is CE5.0 and running a pre 2008 build a workaround is available by editing the following registry values on the terminal using the registry editor in the Tweakit utility.
The details are as mentioned below:
Buid type - Release
Boot code - I090m
OS code - I090m
PCon code - I090l
That build is from 2010 and should be detected by the current version of Windows Mobile Device Center. Do you have other terminals that connect ok and are seen by WMDC on this PC? Is this terminal detected ok on another PC?
I have connected 7535 to this PC and it was well detected by the WMDC. I did not check the unit with other PC but the unit is working fine with Narrowband radio. I even checked the connection but couldn't find for USB.
I am using psion HHT & need drvupdate-x86 for W7 64 bit.
Can anybody help me.
Which handheld you are using? what's the purpose of this connectivity?
thanks and regards,
Thnxx, I have got it.