one of our partner have the following problem. He have EP10 with newest firmware 3.2.xxxx german and have installed micro sd card (4 GB) from SANDISK but the EP10 doesn´t detect the micro sd card. He have taken this micro sd card to Ikôn and the Ikôn are detect this card although the personal computer. Other micro sd card are function in EP10 - this micro sd cards are all bought at same time and he have ordered 40 pieces. This problem he have now with 10 of the micro sd cards in different EP10 but all micro sd card function correct in Ikôn and personal computer.
Any idea why this happen?
Hello Andreas ,
I think we have similar post here :
I hope it helps.
so at least 10 units of Sandisk 4Gb microSD is not detected on the same EP10s that works just fine with another microSD same make and model?
have you tried detecting this microSD in BooSt mode?
Does it come up with mmc0-0 mounted <file system>: <size in MB>
Americas Help Desk
This posting is provided "AS IS". No Warranty. No Guarantee. Maybe updated or changed without notice at any time. You can use the information provided at your own risk.
next problem by this partner. If he insert one of the micro sd card into EP10 which are not correct detected he can´t turn on the EP10? If he insert another micro sd card the EP10 start and it function. If he insert micro sd card which not function in EP10 into a Ikôn it function in Ikôn. Some idea?
@Luke, yes we have tested but no detection and now the next problem with this micro sd cards see below...