Browse by Tags

Dear all, I had HHT 7530 G2 in which touch sceen not working and I restart the HHT then cold reboot also change the battery but still problem remain same Pls do somne needful ASAP E-mail:-vimalsakariya@gmail.com M;-9099921225 Regards vimal from india

Good morning Ramesh , As you have a PDM, could you try upgrading your 7530 G2 device from a USB Mass Storage and let us know how it goes? To do so, please follow the instructions found in the last paragraph " Load From Memory Card Or USB Device " of the Replacing System Software on 7530...

Buenas noches, alguien me podria ayudar a cambiarle la orientacion a mi terminal, es que esta en horizontal (landscape) y quiero cambiarla a vertical (portrait), pero desde la terminal, algun comando, en alguna opcion, por favor, gracias de antemano

Having problems keeping a LS3578 tether scanner connected to a 7530 G2 scanner via bluetooth. It keeps loosing connection. The two devises are only 1 to 3 feet apart. The 7530 is using Narrow Band Radio. Once the connection is loose it takes about 30 to 60 seconds for them to reconnect. I'm unable...

Is there any way to configure the scan width on an 7530 using the Auto Ranging - SE1524ER scanner? When currently used at longer distances the scan is much too wide.

I am about to order some new Narrowband 7530 G2 terminals to replace some old 7030's and 7530 G1's. Are the battery formats the same, and therefore can I use the existing chargers?

We have Location Labels (EAN128)that have a check digit included but Item Numbers,Tag nbrs, Qty's do not how can I configure the 7535 Gun to ignore the check digit for the location without effecting the other fields

Hi Todd, Yes you can install CF card .I am not sure for the drivers for Windows CE 5.0 .You will need to check that with the manufacturer . This units can also have 802.11 and Narrow band and the same time. Kind regards, Lana Help Desk

Working with Nofolk Southern Auto Operations in Detroit, MI and Fostoria, OH. 1) Customer complains imager will not read 1D automotive style bar codes in direct sun light. (24/7 outdoor application). Very unhappy. 2) Imager intermittently fails to emit light when either trigger or scan button is...

Hi We have a few G2s here and the narrow band icon in control panel went missing on a few devices. On one of the G2s we have performed a cold restart and the icon is still missing. Is this a hardware or software issue and how to go about troubleshooting the matter? I really appreciate any help...

On my older 7535G2 I have installed the Juniper Odyssey Wireless client v4.51.0.3095. After configuration and installation of the license key everything seems to work correctly including Warm and Cold resets. I then use TotalRecall v3.10 to create a Backup Profile. I then execute the "Clean Start...

Regards I have a 7530 G2 no lights on and no way if I go into boots (blue , yellow and red) , connecting the PDM LEDs do not light up the keyboard ... What may be the problem?

Thank you. What terminal client and its version is running (you have used) with the 7530G2 ? I have not seen this issue before so any additional info you can provide will go a long way.

Hi, All of a sudden Installed tekterm app was missing in one of the 7530 G2 HHT of a customer in my region. tried to restore the total recall profile but alas, i could not able to find anything in the flash disk. upgraded the OS firmware and tried again but no use. Connected the device thru active...

Dear suport team, I have a 7535 G2 terminal. I installed new main board (PXA270 - rev 0x7) . But system not started. I can't OS to new main board, when i type BSD flash0 system reports at below data Information for : flash0 Block size (bytes) : 0x200 Number of blocks :0x0 ...