Browse by Tags

Hi Garnet, It will best you contact PsionTeklogix Sales for ordering a GPRS + RFID configuration. The LF and HF TagSYS RFID readers you have listed are contact-less RFID readers, both operating at 125kHz/135.4kHz and 13.5mHz respectively. It's read range is very limited between 0.5 inch and 6...

I'm using the RFID CAEN Reader Demo the learn how the RFID reader works. Now I'm getting on the reader a communication error. Becaus I am now on RFID programming I have no idea how to solve this error. Please help. Thanks.

Hi, I have a workabout pro 1. I need to take out the barcode scanner and replace it with a proximity reader. However, the barcode scanner requires 3.3 V only, although it needs 5V for my proximity reader. Therefore, I need some tips for this. Is this doable with software? if yes, could you please...

Chris, Actually you can use RFID tags for this purpose. However, as Nick pointed out, if the solution is not designed properly, there are ways to go around this from a security perspective. With the advances in tag IC, antenna, and overall reader technology, this type of project is closer to being...

Hi Wander, I do agree with backtracking in order to isolate the problem. However, I'm not sure how similar your problem was to the one at hand. I'm specifically referring to the fact that the Agrident reader is a RO (read only) RFID solution, hence it does not write to tags. Peter, As...

Hi Shaun, Based on the information above, do you know which add-on cab they are trying to install in these units? Also, is he installing the appropriate one for the OS they are using (meaning add on for WM Classic to a Classic OS or Pro for a Pro OS)? You also mention that each unit shows different...

Hi, Did you download the CAEN SDK v4.0.0? community.psionteklogix.com/.../543.aspx To drive the CAEN reader, you need the RFID driver DLL and the CAENRFIDLibraryPocketPC.dll Regards, Jan-Manuel

Hi, We have some WAP2 which are using a HF RFID module and the GPRS modem. We are having some troubles with the reader when web services are called during its read cicles. The only thing we could do to avoid the problems would be to disconnect the GPRS module (or Data Connection) when using the Reader...

Hi Eshibi, With HID readers, one thing to save time is to open the reader in Manual (0x0) mode instead of Automatic (0x2). First, you have to select the right protocol and baudrate (by default: ASCII=0, 9600db) HID_Reader.presetSettings settings = new HID_Reader.presetSettings(); settings...

Did you test to modify the following option? Option->Trigger->Wedge to Remote (instead of Local) Thanks, Jan-Manuel

When you start CAEN Wedge, you will see 3 tabs: Configuration / Data / Option. In this case, you need to go on Option tab, on the tree options, you can modify Option->Trigger->Wedge to Remote (instead of Local)

Please find on Download section the version 3.00 of CAEN Tools community.psion.com/.../1135.aspx According to your CAEN reader version, you have first to install the corresponding RFID driver.

Hi Gary, The part number of this cable is : 9011985 ( RFID Cable Power supply). Why do you need to order separately this cable ? Fabien

Below you will find the demo application for WM and CE 5. (Please visit the site to view this file) Please be advised that this is was North America only reader solution for the WAP G1/G2 only. This option has been discontinued and its replacement(s) can be found at the following link: http...

Hi, We have a UHF option with UHF 500 mW + GPRS. The problem is the DPM. In the past, we made prototyping, but there is no released option for DPM, you would have to make this integration by yourself. Pierre

You should contact Scott Green from Psion, he has a better experience on the DPM integration. Thanks, Pierre

This paddle is based on a HF Tagsys module. We have developped the Win CE and Windows mobile drivers. I guess you could use directly all the Tagsys DLL and library, corresponding to the Tagsys Medio S002 module. Jan Manuel Collombon can help you further if necessary.

According to support in Germany the power of WAPro internal USB_H1 port is switched off by default (I upgraded the OS from WM6.0 to WM6.1) and now the device can't recognize a USB device connected to it. I already downloaded several SDKs and HDKs but can't come to a point where i might be able...

Hello Peter, If installed, the demo program should show up in Program Files. It shouldn't be hidden. In any case, you can download the demo software from the following link: http://community.psion.com/knowledge/w/knowledgebase/rfid-partners.aspx Aneline

Hi, could you provide us the datasheet of the tag? Thanks

Hi Raul, Can you use APPS like virtual key instead of F20? Thanks,

Hi SergeyN, Can you go into the Power Properties Control Panel Applet, and goto the [Devices] and [Built-in-devices] tabs, and tell me which Boxes are checked and not checked? -sean {Sean ( I ) notes that the Windows Mobile needs Add-On .CAB files. Yay for that, but wonders what the power properties...

Hi, The 500 mW power (27 dBm) relates to the RF power generated by the RFID module. It is not the power consumption which is higher (about 5 Watts !). Then, concerning the antenna, we speak about ERP or EIRP radiated power which is about 200 mW for the circular antenna (ERP). Pierre

Hi SergeyN, The RFID module requires an OS upgrade (F300k or newer). Please refer to community.psion.com/.../958.aspx Thanks

I purchased WAP with CE.NET5 complete with Agrident RFID Reader AIR200 from Synnex Canada. Can you tell me where I can find the Demo program on the unit? Is it hidden?