Browse by Tags

A customer has a Remote Desktop Application running on the XT10. Now he wants to use the Camera within this application. Are there any idea around how to make picture with camera and send them to Remote Desktop Application? Thanks for sharing feedback and ideas. Matthias Hölscher

Hi team, I have a XT10 Terminal with OS Code 1.4.13438.0. I have enabled the Battery Health within the Power Properties, but I don´t know tha values that designate the stars of health. I have 74% of charge and the value is 1 star. Is there some pending issue in this parameters? What are the...

All PCs have been updated to version 7 and our previous version would not run on the XT10, so this is their first run with MCC

Hello, My company recently purchased 25 XT10s to augment out Scanner inventory (others are 7525, 7527, and 7535s). This is the 2nd unit to encounter this problem. When we try to power on the unit, it will just blink with an amber light (4 LEDs near top of the unit, this one is 2nd from left). With...

Hello, We need to show the signal quality of a Wifi connection in % for a client on a Psion Toklogix Omnii. Actually with the .NET API we can get the RSSI value in dbm. Is it possible to get a formula to convert the dbm value in % ? Thanks in advance.

Good Day All, My company recently upgraded to version 7 of MCC software to handle our diverse network of Psion Devices. One problem I have noticed, especially with the newest devices (XT10) is that they will blink on to connect and less than 2 seconds later it will disconnect. Sometimes when I...

My company just got back an XT10 from the depot. Since it had its motherboard replaced, I needed to reprogram the unit. I cloned another XT10's profile using Total Recall and transfered that clone to the returned unit. The profile didn't take properly and now I can't return the unit to default...

Hi, We are having issues connecting an XT10 to a windows server 2008 via RDP. Windows Server 2003 functions with no problems, but if we try to connect to Server 2008 we get the following error: "The authentication certificate received on the remote computer has expired or is not valid"...

Hi all, Testing here a XT10, OS 1.6.16391.0, side scanner buttons and pistol grip button is not firing scanner. Central scan button is working properly. I have checked manage triggers menu and is correctly configured (Grip Trigger, L.Side Scan, R. Side Scan, Scan, Soft Scan). A clean start does...

Hi, we have an issue with the barcode scanner on one of our Omnii XT10 devices: when we open the DemoScanner application and press the "scan" button, we can see the red light of the barcode scanner, but the scanner fails to capture our barcodes. We tried (among others) types Code 39 and...

I know you can disable ability to use touch screen under control panel individualy on each device. I however have around 50 I wish to disable and have all hooked up through MCC. All of my Omni XT10 handhelds are running Win CE 6.0 1.6. My MCC server is running version: 7.02 Build 4053. Where is...

Hello, We have problem with auto clone restoration function. It concerns to Manage triggers setting in control panel. Because we need to use Decoder Scanner - Alt Angle module instead of Decoder Scanner module, I've change it for each trigger key (Grip Trigger, Soft Scan, Scan, L. SideScan, R...

Hello, we have a some strange bahaviour on XT10 OTT ANSI Telnet connection. correctly with Fn F5 key. We migrating at customer from old NB terminals to OMNI XT. Previous connection was 7030 and 7530 NB terminals to 9400, ANSI emulation. So terminal starts emulation with TCP prompt, user...

Hello, Today, I've discovered one strange behaviour which concerns to power management and suspend mode of XT10 when it's on battery. When I set suspend timeout in power settings to 1,2,3,4 or 5 minutes, terminal goes to suspend mode normally. The problem appears, when I set it to 10 or...

Hi, Is it possible to activate the PsionVU access key sequence (SHIFT, BLUE & 0) using MCC Remote control? Thanks, Heavey Technical

Sean, thanks for the help. Does anyone in the community could help me with some example? In the latter case may be with any version of Oracle. Thanks!

I’m trying to configure an Omnii XT10 to behave the same way like a lot of our 7535G2 terminals. For some reason, unknown to me!, I cannot enable Transmit Code ID Char just for the Code128 flavor. I have the option to enable it for all codes , but this does not do the trick for me… My...

Hi Vinay , Are there any other scanner able to read this barcode? If so, what is the barcode type and length from that "working" device? Thanks,

On our XT10's & XT15's we currently use a single web based site to run our warehouse operations and it has worked well thus far. We are currently asked to have a second web based site that will be accessed on these same devices, which we can do just fine. Our problem is that if the user is...

We're experiencing signal problems with our Omnii XT10 handhelds and I need to know what the recommended RSSI settings are. Roaming - RSSI Threshold Roaming - AP Delta We have Aruba wireless and customers are complaining that at times the signal is only showing 1 or 2 bars for signal strength...

Hello, I´ve just upgraded a XT10 to 1.10.21653 and TR5 is avaliable on this version. But how to create a Auto Restore profile on these new TR? I´ve followed the Manual concerning put the profile onto FlashDisk\TotalRecall directory but not Auto Restore action happened. Thanks in advance...

Hi We have a site which has recently upgraded from old 7030 narrowband devices with 9300 controllers to Omnni XT10 with 9510 controllers, they are also running MIS as an interface to SAP. They are reporting issues with the F12 key as when this is pressed it should perfrom a CANCEL command in SAP...

We are running OMNI XT10 , WIN CE 6.0, latest software version downloaded off of Psion site as of 11/23/11. We’ve had issues with the units locking up on black screen and not coming back on until the battery is removed for a minute reseated and turned back on. In some cases a total recall has...

Hello, We use Naurtech 5.5.7 with our XT10. We have this problem of focus, so we put in place the procedure describe here: http://community.psion.com/knowledge/w/knowledgebase/1045.aspx But now, we need to have some script in Naurtech on barcode read, so it would mean to re-activate the scanning...